Segment: Sport / Super Sport
Production years: 2010, 2011
The Aprilia RSV4 is a super sport bike made by Aprilia in 2009 as a replacement model for the RSV 1000 R. It was manufactured until the present (2023). The bike was offered in two versions, the RSV4 Factory and RSV4 R limited edition, made in only 350 units.
In 2010, the Italian motorcycle manufacturer released the Aprilia RSV4 R, a cheaper version of the RSV4 Factory, with different suspensions, aluminum elements instead of the Factory's magnesium, and a non-adjustable chassis for the swingarm pivot point.
Compared to the Factory model, the R version didn't feature adjustable inlet ducts, adjustable frame, or carbon fiber bodywork. It packed a Showa fork on the front, a Sachs monoshock, aluminum cases, and cast aluminum wheels instead of magnesium.
The front wheel was guided by a 43 mm adjustable Showa fork with 120 mm wheel travel, while the rear wheel was held in place by a double-sided aluminum swingarm tied to an adjustable Sachs monoshock with 130 mm of travel.
In the performance department, the 2010 Aprilia RSV4 R had its heartbeat set by a 999cc four-stroke V-4 liquid-cooled engine mounted underneath its fuel tank, boasting 180 hp with a peak force at 12,500 rpm and 115 Nm (85 lb-ft) torque at 10,000 rpm.
The bike's power was handled by a six-speed cassette-type transmission with a multi-disc oil-bath clutch with a mechanical slipper system and sent to the rear wheel via a final chain drive.
engine specs | Type: | longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder | Displacement: | 999.6 cm3 | Bore X Stroke: | 3.1x2.1 in OR 79 mm | Compression Ratio: | 13.0:1 | Horsepower: | 180/12500 KW(hp)/RPM | Torque: | 85/10000 lb-ft/RPM OR 115/10000 Nm/RPM | Fuel System: | 4 Weber-Marelli 48-mm throttle bodies with 8 injectors |
---|
transmission specs | Gearbox: | 6-speed cassette type | Clutch: | Multi-disc oil-bath, with mechanical slipper system | Primary Drive: | Gears | Final Drive: | Chain |
---|
chassis specs | Frame: | Aluminium dual spar frame with cast and pressed elements. | Front Suspension: | Upside-down Showa fork with 43 mm stanchions | Rear Suspension: | Sachs piggy back monoshock with completely adjustable: spring preload, wheelbase, hydraulic compression and rebound damping. APS progressive linkage. Wheel travel 130 mm | Front Brake: | Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial callipers with 4 .. 34-mm opposite. Sintered pads. Radial pump and metal braided brake hose | Rear Brake: | 220-mm diameter disc; Brembo calliper with two .. 32 mm isolated pistons. Sintered pads. Pump with integrated tank and metal braided hose |
---|
dimension specs | Overall Length: | 80.3 in OR 2040 mm | Overall Width: | 28.9 in OR 734 mm | Seat Height: | 33.3 in OR 846 mm | Wheelbase: | 55.9 in OR 1420 mm | Ground Clearance: | 5.1 in OR 130 mm | Weight: | 406 lbs OR 184 kg | Fuel Capacity: | 4.5 gallons OR 17.0 L |
---|
tyres specs | Front: | 120/70 ZR 17 | Rear: | 190/55 ZR 17 (alternative: 190/50 ZR 17) |
---|