autoevolution
 

MOTO GUZZI Breva 750 (2008-2009) Specs, Performance & Photos

Segment: Naked / Road
Production years: 2008, 2009

MOTO GUZZI Breva 750 2008-2009 4 Photos
MOTO GUZZI Breva 750 (2008-2009)MOTO GUZZI Breva 750 (2008-2009)MOTO GUZZI Breva 750 (2008-2009)MOTO GUZZI Breva 750 (2008-2009)

The Breva was a series of naked motorcycles manufactured by Moto Guzzi from 2003 to 2011. The first model in the family was the Breva 750, which began its journey in 2003, being the smallest displacement model in the series.

The bike was based on the pre-existing Moto Guzzi Nevada but with a Weber-Marelli Electronic Fuel Injection (EFI) system, which was previously used only on big block motorcycles like the California and V11.

The Breva series was available in several displacement versions, such as the Breva 750 ie, manufactured from 2003 to 2011, followed by the Breva 1100 from 2005 to 2011, the Breva 750 Touring and Breva 850 from 2006 to 2011, and the Breva 1200 from 2008 to 2011.

In 2008, the Italian motorcycle manufacturer launched the Moto Guzzi Breva V750, a rider-friendly, budget-friendly, and forgiving machine with a classic look and a modern approach.

It came equipped from the factory with standard features, such as three-spoke cast-aluminum wheels, a single-sided swingarm, a dual exhaust system with a silencer mounted on each side, a two-up seat with grab rails, and a single, round headlight up front.

The 2008 Moto Guzzi Breva 750 delivered 49 hp with a peak force at 6,800 rpm and 56 Nm (41 lb-ft) torque at 3,600 rpm, all coming from a 744cc four-stroke air-cooled V-twin engine fed by a Weber-Marelli fuel injection system.

MOTO GUZZI Breva 750 2008-2009

MOTO GUZZI Breva 750 744

engine specs
Type:Two cylinders, air-cooled, 4-stroke, SOHC
Displacement:744 cm3
Bore X Stroke:3.1x2.9 in OR 79 mm
Compression Ratio:9.6:1
Horsepower:49/6800 KW(hp)/RPM
Torque:41/3600 lb-ft/RPM OR 56/3600 Nm/RPM
Fuel System:Weber-Marelli electric injection
transmission specs
Gearbox:6 Speed, manual
Clutch:Single disc dry with cush drive
Primary Drive:Gears
Final Drive:Shaft
chassis specs
Frame:Detachable tubular duplex cradle in special high-strengh steel
Front Suspension:Marzocchi hydraulic telescopic fork, 1.57” (40 mm)
Rear Suspension:Swinging arm in light cast alloy with two dampers, preload adjustable
Front Brake:Brembo Serie Oro, Single stainless steel floating disc, 12.6” (320 mm), four piston calipers
Rear Brake:Single steel disc, 10.24” (260 mm)
dimension specs
Overall Length:86.2 in OR 2189 mm
Overall Width:28.7 in OR 729 mm
Seat Height:31.1 in OR 790 mm
Wheelbase:59 in OR 1499 mm
Ground Clearance:6.9 in OR 175 mm
Weight:401 lbs OR 182 kg
Fuel Capacity:4.8 gallons OR 18.2 L
tyres specs
Front:110/70 17 54 H
Rear:130/80 17 65 H
  report a mistake on this page