Segment: Scooter
Production years: 1984, 1985
2 Photos
The engine (complete with three transfer ports) produced about 2 bhp more as compared to its installation in an ET3 – presumably this was accomplished by the increased compression ratio and slightly bigger carb size. The electronic ignition was not publicised this time around since this feature could already be found on some of the PK range, with the rest soon to follow. As with its predecessors, a large expansion box type silencer was fitted as standard – these being the only Vespas to feature such an item. An unfortunate consequence of one being fitted on this model was that there was no room for the side-mounted spare wheel found on other variants.
VESPA P125 ETS 1984-1985
VESPA P125 ETS 125
| engine specs | Type: | Two strike, Single cylinder, air-cooled | Displacement: | 121.2 cm3 | Bore X Stroke: | 2.2x2.0 in OR 56 mm | Compression Ratio: | 9.5:1 | Horsepower: | 8.6/6000 KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | Carburetor |
|---|
| transmission specs | Gearbox: | 4-Speed, grip-shift, constant mesh | Clutch: | Wet Multi-plate | Primary Drive: | - | Final Drive: | Direct drive |
|---|
| chassis specs | Frame: | Pressed sheet steel, streamlined monocoque structure | Front Suspension: | - | Rear Suspension: | - | Front Brake: | Drum 150 mm | Rear Brake: | Drum 150 mm |
|---|
| dimension specs | Overall Length: | 66.1 in OR 1679 mm | Overall Width: | 27.6 in OR 701 mm | Seat Height: | - | Wheelbase: | 46.5 in OR 1181 mm | Ground Clearance: | 9.9 in OR 251 mm | Weight: | 198 lbs OR 90 kg | Fuel Capacity: | 1.6 gallons OR 6.1 L |
|---|
| tyres specs | Front: | 3.0 x 10" | Rear: | 3.0 x 10" |
|---|
| power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
|---|