Segment: Sport / Super Sport
Production years: 2003, 2004
In 2003, the Italian motorcycle manufacturer launched the Moto Guzzi V11 Ballabio, a derivative of the standard model named after the notorious Italian Hillclimb Speed Championship.
The bike sports the same basics as the standard model but with a higher handlebar for a more comfortable and relaxed riding experience and a windscreen for better wind protection.
In the visual department, the bike was fitted with the same standard features as previous models, including a single seat with a passenger seat cowl, a dual exhaust system, three-spoke alloy wheels, an additional windscreen, and a higher handlebar.
For power, the 2003 Moto Guzzi V11 Ballabio had installed a 1,064cc four-stroke air-cooled V-twin engine at its core, boasting 91 hp with a peak force at 7,800 rpm and 95 Nm (70 lb-ft) torque at 6,000 rpm.
All bits and pieces were bolted to a steel frame, including the 40 mm adjustable inverted Marzocchi telescopic fork on the front and a cantilever swingarm with an adjustable Sachs-Boje monoshock on the rear acting as suspension.
The braking performance was handled by two 320 mm Brembo ORO stainless steel floating discs coupled to four-piston calipers on the front wheel and a 282 mm stainless steel fixed disc tied to a dual-piston caliper on the rear wheel, offering excellent stopping power.
engine specs | Type: | Air cooled, four stroke, transverse V-twin cylinder, OHC, 2 valves per cylinder | Displacement: | 1064 cm3 | Bore X Stroke: | 3.6x3.1 in OR 91 mm | Compression Ratio: | 9.8:1 | Horsepower: | 91/7800 KW(hp)/RPM | Torque: | 70/6000 lb-ft/RPM OR 95/6000 Nm/RPM | Fuel System: | Multipoint phased sequential fuel injection |
---|
transmission specs | Gearbox: | 6 Speed, manual | Clutch: | Double discs, dry, with hydraulic command | Primary Drive: | Gears | Final Drive: | Shaft |
---|
chassis specs | Frame: | Steel | Front Suspension: | Marzocchi USD fork, 40 mm compression/extension adjustable | Rear Suspension: | Cantilever swing arm with Sachs Boge mono shock compression/extension/preload adjustable | Front Brake: | Two Brembo ORO Series stainless steel 320 mm floating discs with 4 piston caliper | Rear Brake: | Single stainless steel 282 mm fixed disc with Brembo 2 piston caliper |
---|
dimension specs | Overall Length: | 84.6 in OR 2149 mm | Overall Width: | 30.9 in OR 785 mm | Seat Height: | 31.5 in OR 800 mm | Wheelbase: | 58.7 in OR 1491 mm | Ground Clearance: | 7 in OR 178 mm | Weight: | 487 lbs OR 221 kg | Fuel Capacity: | 5.8 gallons OR 22.0 L |
---|
tyres specs | Front: | 120/70-17 | Rear: | 180/55-17 |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|