autoevolution
 

MOTO GUZZI California Aquila Nera (2010-2011) Specs, Performance & Photos

Segment: Custom/Cruiser
Production years: 2010, 2011

MOTO GUZZI California Aquila Nera 2010-2011 2 Photos
MOTO GUZZI California Aquila Nera (2010-2011)MOTO GUZZI California Aquila Nera (2010-2011)

The Moto Guzzi California was a cruiser motorcycle that debuted in 1971 as a replacement model for the Moto Guzzi 850 GT and was manufactured until 2021. It featured a standard riding position with floorboards, a heel-and-toe shifter, and linked Brembo brakes.

Over its production time, the Moto Guzzi California evolved into numerous versions with similar appearances and slightly different specifications, like the Moto Guzzi California Aquila Nera that debuted in 2010.

In 2010, alongside the Bellagio Aquila Nera and Nevada 750 Aquila Nera, the Italian motorcycle manufacturer launched the Moto Guzzi California Aquila Nera, also called the Black Eagle, a cruising motorcycle bare in design with a minimum amount of brackets, chrome, and accessories.

In the visual department, the bike had standard features, such as a round headlight, a teardrop-shaped fuel tank, a one-piece dual seat with a pillion grab rail, valanced fenders, side-mounted rear shocks, a two-into-two exhaust system, and wire-spoke wheels.

Performance-wise, the 2010 Moto Guzzi California Aquila Nera had installed a 1,064cc four-stroke air-cooled V-twin engine controlled by a fuel injection system, delivering 74 hp with a peak force at 6,400 rpm and 88 Nm (65 lb-ft) torque at 5,000 rpm.

All that power was handled by two 320 mm discs and four-piston calipers mounted on the front wheel and a 282 mm disc with a dual-piston caliper installed on the rear wheel.

MOTO GUZZI California Aquila Nera 2010-2011

MOTO GUZZI California Aquila Nera 1064

engine specs
Type:Two cylinders, air-cooled, 4-stroke, SOHC
Displacement:1064 cm3
Bore X Stroke:3.6x3.1 in OR 91 mm
Compression Ratio:9.8:1
Horsepower:74/6400 KW(hp)/RPM
Torque:65/5000 lb-ft/RPM OR 88/5000 Nm/RPM
Fuel System:Multipoint phased sequential fuel
transmission specs
Gearbox:5 Speed
Clutch:dual disc dry with mechanical control
Primary Drive:Gears
Final Drive:Shaft
chassis specs
Frame:Detachable tubular duplex cradle in special high-strength steel
Front Suspension:Marzocchi hydraulic telescopic fork, 45 mm, adjustable separately
Rear Suspension:swing arm with 2 hydraulic shock absorbers, exstension adjustable
Front Brake:double Brembo Serie Oro stainless steel floating disc, 320 mm, 4 piston calipers
Rear Brake:single Brembo stainless steel floating disc, 282 mm, 2 piston calipers
dimension specs
Overall Length:93.7 in OR 2380 mm
Overall Width:32.1 in OR 815 mm
Seat Height:30.7 in OR 780 mm
Wheelbase:61.4 in OR 1560 mm
Ground Clearance:-
Weight:553 lbs OR 251 kg
Fuel Capacity:5 gallons OR 18.9 L
tyres specs
Front:110/90 VB 18
Rear:140/70 VB 17
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
  report a mistake on this page