autoevolution
 

MOTO GUZZI V11 Le Mans (2003-2004) Specs, Performance & Photos

Segment: Sport / Super Sport
Production years: 2003, 2004

MOTO GUZZI V11 Le Mans 2003-2004 2 Photos
MOTO GUZZI V11 Le Mans (2003-2004)MOTO GUZZI V11 Le Mans (2003-2004)

The Moto Guzzi was a roadster motorcycle manufactured by Moto Guzzi from 1999 until 2006. The first V11 Sport model was presented at the 1997 Milan Motor Show, but due to the company's poor financial situation, the bike was released into production in 1999.

The bike packed the engine used on the 1100 Sport model, which was derived from an engine designed by Giulio Cesare Carcano in 1995. In addition, it retained the central camshaft of the 1100 Sport.

In 2003, the Italian motorcycle manufacturer launched the Moto Guzzi V11 Le Mans, a motorcycle that borrowed a dear name of the brand. In addition, the bike was fitted with a forkhead half fairing.

Visually, the Le Mans had standard features, such as a round headlight integrated into a half fairing, a windscreen, a single seat with a passenger seat cover, a dual exhaust system with a silencer on each side, and three-spoke lightweight wheels.

In the performance department, the 2003 Moto Guzzi V11 Le Mans had its heartbeat set by a 1,064cc four-stroke air-cooled V-twin engine that delivered an output power of 91 hp with a peak force at 7,800 rpm and 95 Nm (70 lb-ft) torque at 6,000 rpm.

The bike's power was kept in the leash by two 320 mm brake discs and four-piston calipers acting on the front wheel, a 282 mm brake disc, and a dual-piston caliper controlling the rear wheel.

MOTO GUZZI V11 Le Mans 2003-2004

MOTO GUZZI V11 Le Mans 1064

engine specs
Type:Air cooled, four stroke, transverse V-twin cylinder, OHC, 2 valves per cylinder
Displacement:1064 cm3
Bore X Stroke:3.6x3.1 in OR 91 mm
Compression Ratio:9.8:1
Horsepower:91/7800 KW(hp)/RPM
Torque:70/6000 lb-ft/RPM OR 95/6000 Nm/RPM
Fuel System:Magneti Marelli IAW Multipoint phased sequential fuel injection
transmission specs
Gearbox:6 Speed, manual
Clutch:Double discs, dry, with hydraulic command
Primary Drive:Gears
Final Drive:Shaft
chassis specs
Frame:Steel
Front Suspension:Marzocchi USD fork, 43 mm compression/extension adjustable
Rear Suspension:Cantilever swing arm with Sachs Boge mono shock compression/extension/preload adjustable
Front Brake:Two Brembo ORO Series stainless steel 320 mm floating discs with 4 piston caliper
Rear Brake:Single stainless steel 282 mm fixed disc with Brembo 2 piston caliper
dimension specs
Overall Length:84.6 in OR 2149 mm
Overall Width:30.9 in OR 785 mm
Seat Height:31.5 in OR 800 mm
Wheelbase:58.7 in OR 1491 mm
Ground Clearance:7 in OR 178 mm
Weight:498 lbs OR 226 kg
Fuel Capacity:5.5 gallons OR 20.8 L
tyres specs
Front:120/70-17
Rear:180/55-17
  report a mistake on this page