autoevolution
 

YAMAHA Fazer 8 (2011-2012) Specs, Performance & Photos

Segment: Naked / Road
Production years: 2011, 2012

YAMAHA Fazer 8 2011-2012 4 Photos
YAMAHA Fazer 8 (2011-2012)YAMAHA Fazer 8 (2011-2012)YAMAHA Fazer 8 (2011-2012)YAMAHA Fazer 8 (2011-2012)

The Yamaha Fazer 8, also known as the FZ8-S, was a half-naked motorcycle made by Yamaha in 2010 to replace the FZ6 model. It continued production until 2015 when it was replaced by the Yamaha MT-09.

In 2011, the Japanese motorcycle maker released the Yamaha Fazer 8 alongside its identical brother without any fairings whatsoever. The Fazer 8 was in its second year of production and came without any significant modifications.

The 2011 half-faired motorcycle had fitted standard features, such as an upper fairing with a dual headlight system, a tall windscreen, a two-piece dual seat with pillion grab rails, a four-into-one exhaust system with a fat silencer mounted on the right side, and five-spoke lightweight wheels.

In the performance department, the 2011 Yamaha Fazer 8 had its heartbeat set by a 779cc four-stroke four-cylinder liquid-cooled engine fed by an electronically controlled fuel injection system, boasting 106 hp with maximum strength at 10,000 rpm and 83 Nm (61 lb-ft) torque at 8,000 rpm.

The bike's engine was paired to a six-speed manual transmission with a wet multi-disc clutch, sending the power to the rear axle through a final chain drive, reaching a top speed of 215 kph (134 mph).

From top speed to a complete stop, the motorcycle relied on two 310 mm discs on the front wheel and a 267 mm disc on the rear wheel, coupled to hydraulic calipers.

YAMAHA Fazer 8 2011-2012

YAMAHA Fazer 8 779

engine specs
Type:Liquid-cooled, DOHC, 16-valve, inline 4
Displacement:779 cm3
Bore X Stroke:2.7x2.1 in OR 69 mm
Compression Ratio:12.0:1
Horsepower:-/- KW(hp)/RPM
Torque:61/8000 lb-ft/RPM OR 83/8000 Nm/RPM
Fuel System:Mikuni 35mm throttle body F.I
transmission specs
Gearbox:6-speed manual
Clutch:Wet multi-disc, manual
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Aluminium die-cast, Diamond Shaped
Front Suspension:Telescopic 43mm fork 130mm wheel travel
Rear Suspension:Linked monoshock with spring preload adjustment
Front Brake:Hydraulic dual disc, 310 mm
Rear Brake:Hydraulic single disc, 267 mm
dimension specs
Overall Length:84.3 in OR 2141 mm
Overall Width:30.3 in OR 770 mm
Seat Height:32.1 in OR 815 mm
Wheelbase:57.5 in OR 1461 mm
Ground Clearance:5.5 in OR 140 mm
Weight:474 lbs OR 215 kg
Fuel Capacity:4.5 gallons OR 17.0 L
tyres specs
Front:120/70 ZR17
Rear:180/55 ZR17
  report a mistake on this page