autoevolution
 

YAMAHA Fazer 8 (2010-2011) Specs, Performance & Photos

Segment: Naked / Road
Production years: 2010, 2011

YAMAHA Fazer 8 2010-2011 7 Photos
YAMAHA Fazer 8 (2010-2011)YAMAHA Fazer 8 (2010-2011)YAMAHA Fazer 8 (2010-2011)YAMAHA Fazer 8 (2010-2011)YAMAHA Fazer 8 (2010-2011)YAMAHA Fazer 8 (2010-2011)YAMAHA Fazer 8 (2010-2011)

The Yamaha Fazer 8, also known as the FZ8-S, was a naked motorcycle made by Yamaha in 2010 alongside the FZ8, an almost identical motorcycle with a naked style. The bikes were manufactured until 2015 when they were replaced by the Yamaha MT-09.

The motorcycles were for sale in Europe, America, Canada, Australia, and New Zealand, replacing the smaller FZ6 and FZ6 Fazer models. The FZ8 featured a naked body, while the Fazer 8 was dressed in a half-fairing and featured an Anti-Lock Braking System (ABS).

In the visual department, the Fazer 8 model had fitted standard features, such as an upper cowl with a dual headlight system, a tall windscreen for wind protection, a two-piece dual seat with passenger grab handles, a four-into-one exhaust system, and lightweight five-spoke wheels.

The bike was built around a diamond-shaped frame with a telescopic fork on the front, offering 130 mm wheel travel, and a swingarm with a preload-adjustable shock absorber on the rear, providing 130 mm of travel.

In the performance department, the 2010 Yamaha Fazer 8 had installed a 779cc four-stroke four-cylinder liquid-cooled engine managed by a fuel injection system, delivering 106 hp with a peak force at 10,000 rpm and 81 Nm (60 lb-ft) torque at 8,000 rpm.

Driven by a six-speed manual transmission with a wet multi-disc clutch, the power reached the rear wheel through a final chain drive, pushing the motorcycle to 215 kph (134 mph).

YAMAHA Fazer 8 2010-2011

YAMAHA Fazer 8 779

engine specs
Type:Liquid-cooled, DOHC, 16-valve, inline 4
Displacement:779 cm3
Bore X Stroke:2.7x2.1 in OR 69 mm
Compression Ratio:12.0:1
Horsepower:-/- KW(hp)/RPM
Torque:61/8000 lb-ft/RPM OR 83/8000 Nm/RPM
Fuel System:Mikuni 35mm throttle body F.I
transmission specs
Gearbox:6-speed manual
Clutch:Wet multi-disc, manual
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Aluminium die-cast, Diamond Shaped
Front Suspension:Telescopic 43mm fork 130mm wheel travel
Rear Suspension:Linked monoshock with spring preload adjustment
Front Brake:Hydraulic dual disc, 310 mm
Rear Brake:Hydraulic single disc, 267 mm
dimension specs
Overall Length:84.3 in OR 2141 mm
Overall Width:30.3 in OR 770 mm
Seat Height:32.1 in OR 815 mm
Wheelbase:57.5 in OR 1461 mm
Ground Clearance:5.5 in OR 140 mm
Weight:465 lbs OR 211 kg
Fuel Capacity:4.5 gallons OR 17.0 L
tyres specs
Front:120/70 ZR17
Rear:180/55 ZR17
  report a mistake on this page