TRIUMPH Speed Triple Two Tone Special Edition (2010) Specs, Performance & Photos

Segment: Naked / Road
Production started year: 2010

TRIUMPH Speed Triple Two Tone Special Edition 2010
TRIUMPH Speed Triple Two Tone Special Edition (2010)

In 2010, after 15 years of Triumph Speed Triple manufacturing and over 35,000 units later, the British motorcycle manufacturer launched the Triumph Speed Triple Two Tone Special Edition, a unique machine with a two-tone paint job and higher specifications than the standard model.

The 2010 special edition motorcycle came in a vivid Tornado Red color scheme with a Crystal White center stripe and a black pinstripe, alongside a color-matched fly screen and seat cover.

In addition, the motorcycle packed upgraded suspension that was introduced for the following models. The suspension featured modified internal components on both front and rear shocks that improved damping.

Underneath its fuel tank, the 2010 Triumph Speed Triple Two Tone Special Edition motorcycle had installed a 1,050cc four-stroke three-cylinder liquid-cooled engine managed by a fuel injection system, delivering 130 hp at 9,250 rpm and 103 Nm (76 lb-ft) torque at 7,750 rpm.

The bike's power was handled by a six-speed manual transmission with a wet multi-plate clutch and spun the rear wheel through a final X-ring chain drive.

The bike was built around an aluminum beam twin-spar frame with a 43 mm fully adjustable Showa fork on the front and two 320 mm floating discs with four-piston Brembo calipers.

On the rear, the motorcycle packed a fully adjustable Showa shock absorber with 134 mm wheel travel and a 220 mm disc with two-piston Nissin calipers, delivering excellent handling and stopping power.

TRIUMPH Speed Triple Two Tone Special Edition 2010

TRIUMPH Speed Triple Two Tone Special Edition 1050

engine specs
Type:4-stroke liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement:1050 cm3
Bore X Stroke:3.1x2.8 in OR 79 mm
Compression Ratio:12:1
Horsepower:130/9250 KW(hp)/RPM
Torque:76/7750 lb-ft/RPM OR 103/7750 Nm/RPM
Fuel System:Multipoint sequential electronic fuel injection with SAI
transmission specs
Clutch:Wet, multi-plate
Primary Drive:-
Final Drive:X ring chain
chassis specs
Frame:Aluminum beam twin spar
Front Suspension:Showa 43 mm upside down forks with dual rate springs and adjustable preload, rebound and compression damping, 120 mm travel
Rear Suspension:Showa Monoshock with adjustable preload and rebound and compression damping, 134 mm rear wheel travel
Front Brake:Twin 320 mm floating discs. Brembo 4 piston 4 pad radial calipers
Rear Brake:Single 220 mm disc, Nissin 2 piston sliding caliper
dimension specs
Overall Length:80.9 in OR 2055 mm
Overall Width:30.6 in OR 777 mm
Seat Height:32.7 in OR 831 mm
Weelbase:56.1 in OR 1425 mm
Ground Clearance:-
Weight:478 lbs OR 217 kg
Fuel Capacity:4.8 gallons OR 18.2 L
tyres specs
Front:120/70 ZR17
Rear:180/55 ZR17
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
  report a mistake on this page