Segment: Enduro/Offroad
Production years: 1977, 1978, 1979, 1980, 1981, 1982, 1983
The heart of the PE was a 250cc two-stroke motor with heavy flywheels and reed-valve induction. The engine made only 28 hp (20.8 Kw) at 8,000 rpm but pulled like a freight train. Even regular PE riders were often amazed at how the PE could slog up the steepest climb, or through the most glutinous bog, with the reed petals clattering merrily away and the heavy flywheels keeping the motor turning.
engine specs | Type: | Two stroke, single cylinder, piston and reed valve | Displacement: | 246 cm3 | Bore X Stroke: | 2.6x2.8 in OR 66 mm | Compression Ratio: | 7.1:1 | Horsepower: | 28/8000 KW(hp)/RPM | Torque: | 20/7500 lb-ft/RPM OR 27/7500 Nm/RPM | Fuel System: | Mikuni VM36SS carburetor |
---|
transmission specs | Gearbox: | 5-Speed | Clutch: | Wet, multiplate | Primary Drive: | - | Final Drive: | Chain |
---|
chassis specs | Frame: | - | Front Suspension: | Telescopic phneumatic/coil spring, oil dampened | Rear Suspension: | Swingarm. gas/oil dampened spring, 3-way adjustable | Front Brake: | Drum | Rear Brake: | Drum |
---|
dimension specs | Overall Length: | 84.6 in OR 2149 mm | Overall Width: | 33.7 in OR 856 mm | Seat Height: | - | Wheelbase: | 57.3 in OR 1455 mm | Ground Clearance: | 11 in OR 279 mm | Weight: | 245 lbs OR 111 kg | Fuel Capacity: | 3 gallons OR 11.4 L |
---|
tyres specs | Front: | 3.00-21 4PR | Rear: | 4.50-18 4PR |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|