autoevolution
 

SHERCO 250 SE-R (2016-Present) Specs, Performance & Photos

Segment: Enduro/Offroad
Production started year: 2016

SHERCO 250 SE-R 2016-Present 11 Photos
SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)SHERCO 250 SE-R (2016-Present)

Like all Sherco models the 250 SE-R 2-stroke benefits from the latest technology and it is also equipped with an electric starter. The valve openings are electronically controlled and are a function of the ignition curve which provides perfect throttle response. This is the secret of this engine, it is unanimously recognized for its efficiency at both high and low speeds.

The chassis, meanwhile received upgrades based on the recipe that has made the Sherco reputation: perfect handling and adaptation to the demands placed upon it by the rigors of enduro racing. This year the bike is equipped with a new exhaust, new footrests and a reinforced rear subframe, it is equipped with higher quality components and should show improved resistance over time.

SHERCO 250 SE-R 2016-Present

SHERCO 250 SE-R 250

engine specs
Type:Single cylinder, two stroke, liquid-cooled
Displacement:249.32 cm3
Bore X Stroke:2.6x2.8 in OR 66 mm
Compression Ratio:-
Horsepower:/ KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:Carburetor Keihin PWK 36
transmission specs
Gearbox:6-Speed sequential
Clutch:Wet multi-disc, hydraulic
Primary Drive:Gears
Final Drive:Chain
chassis specs
Frame:High strength Chrome-Molybdenum steel semi-perimeter
Front Suspension:WP hydraulic telescopic adjustable compression and rebound 48 mm diameter with 300 mm of stroke
Rear Suspension:WP Monoshock progressive rear suspension with aluminum control rods, adjustable for high and low speed compression and spring pre-load. 330 mm (13 in) Racing shock
Front Brake:Brembo hydraulic 260mm
Rear Brake:Brembo hydraulic 220mm
dimension specs
Overall Length:-
Overall Width:-
Seat Height:37.4 in OR 950 mm
Wheelbase:58.3 in OR 1481 mm
Ground Clearance:14 in OR 356 mm
Weight:247 lbs OR 112 kg
Fuel Capacity:2.5 gallons OR 9.5 L
tyres specs
Front:1.60 x 21 aluminum rim with Michelin Enduro Competition tube-type tire
Rear:2.15 x 18 aluminum rim with Michelin Enduro Competition tube-type tire
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
Notes
Systeme Allumage: DC - CDI ignition with digital advance
  report a mistake on this page