autoevolution
 

DUCATI Hypermotard 796 (2011-2012) Specs, Performance & Photos

Segment: Supermotard
Production years: 2011, 2012

DUCATI Hypermotard 796 2011-2012 6 Photos
DUCATI Hypermotard 796 (2011-2012)DUCATI Hypermotard 796 (2011-2012)DUCATI Hypermotard 796 (2011-2012)DUCATI Hypermotard 796 (2011-2012)DUCATI Hypermotard 796 (2011-2012)DUCATI Hypermotard 796 (2011-2012)

The Ducati Hypermotard 796 was a naked motorcycle part of the Hypermotard family that debuted in 2007. The 796 model debuted in 2009, and compared to the 1100 models, it featured a smaller engine with less power and a lower overall weight.

Other notable features of the Ducati 796 model included a 200 mm lower seat height at 825 mm, a wet slipper clutch instead of the dry unit used on 1100 models, and a non-adjustable suspension system. In addition, the bike retained the single-sided swingarm and foldable mirrors used on the larger versions.

Also, the bike's instrument cluster was similar to the one used on the Ducati Streetfighter but with an orange backlight that differentiated the Ducati 796 from the 2010 Ducati 1100 models.

In the visual department, the bike was fitted with standard features, such as a duck beak-shaped front fairing, a one-piece dual seat, an under-seat-mounted exhaust system, a single-sided swingarm, and 10-spoke lightweight wheels.

As for power, the 2011 Ducati Hypermotard 796 had its heartbeat set by an 803cc four-stroke air-cooled V-twin engine with a fuel injection system in charge, delivering 81 hp with a peak at 8,000 rpm and 75 Nm (55 lb-ft) torque at 6,250 rpm.

The bike's stopping power was achieved by two 305 mm discs with four-piston Brembo calipers on the front wheel and a single 245 mm disc with a dual-piston caliper on the rear wheel.

DUCATI Hypermotard 796 2011-2012

DUCATI Hypermotard 796 803

engine specs
Type:air-cooled, four-stroke, 90-degree V-Twin, SOHC, desmodromic 2 valves per cylinder
Displacement:803 cm3
Bore X Stroke:3.5x2.6 in OR 89 mm
Compression Ratio:11.0:1
Horsepower:81/8000 KW(hp)/RPM
Torque:55/6250 lb-ft/RPM OR 75/6250 Nm/RPM
Fuel System:EFI
transmission specs
Gearbox:6-speed, manual
Clutch:APTC wet multiplate with hydraulic control
Primary Drive:straight cut gears
Final Drive:chain
chassis specs
Frame:tubular steel trellis
Front Suspension:43mm upside-down fork
Rear Suspension:adjustable Sachs monoshock with progressive linkage
Front Brake:dual 305mm discs, 4-piston calipers, Brembo
Rear Brake:single 245mm disc, 2-piston caliper
dimension specs
Overall Length:-
Overall Width:-
Seat Height:32.5 in OR 826 mm
Wheelbase:57.3 in OR 1455 mm
Ground Clearance:-
Weight:368 lbs OR 167 kg
Fuel Capacity:3.2 gallons OR 12.1 L
tyres specs
Front:120/70 ZR17
Rear:160/55 ZR17
  report a mistake on this page