autoevolution

Segment: Enduro/Offroad

The AWD 450E includes an aluminum aftermarket exhaust for added horsepower, and the choice of the CHRISTINI EFI System or a Keihin FCR 40mm Carburetor for increased throttle response and greater tunability.

The 450E is carried by WP XPlor 48mm forks and a fully adjustable rear shock with linkage suspension. A wide ratio transmission and electric starter make life easy. Go where others can’t with the CHRISTINI AWD 450E.

Christini AWD 450E 2016 - Present 6 Photos
Christini AWD 450E (2016 - Present)Christini AWD 450E (2016 - Present)Christini AWD 450E (2016 - Present)Christini AWD 450E (2016 - Present)Christini AWD 450E (2016 - Present)Christini AWD 450E (2016 - Present)
Christini AWD 450E 2016 - Present

Christini AWD 450E 450

engine specs
Type
Liquid-cooled single cylinder four stroke
Displacement
450 cm3
Bore X Stroke
3.8x2.4 in OR 97 mm
Compression Ratio
11.0:1
Horsepower
44/0 KW(hp)/RPM
Torque
0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System
Carburetor
transmission specs
Gearbox
5-Speed Wide Ratio Transmission
Clutch
-
Primary Drive
-
Final Drive
Chain
chassis specs
Frame
Twin Spar Aluminum Frame
Front Suspension
WP XPlor 48mm sealed cartridge forks, spring preload/sag, high and low speed compression, rebound and damping adjustability
Rear Suspension
Fast Ace shock with 24 click Compression adjustment, spring pre-load adjuster, 15 click externally adjustable rebound, and piggyback aluminum reservoir
Front Brake
Single Disc 240 mm
Rear Brake
Single Disc 240 mm
dimension specs
Overall Length
-
Overall Width
-
Seat Height
35.8 in OR 909 mm
Weelbase
59.1 in OR 1501 mm
Ground Clearance
13 in OR 330 mm
Weight
278 lbs OR 126 kg
Fuel Capacity
2.1 gallons OR 7.9 L
tyres specs
Front
80/100-21
Rear
110/100-18
power system specs
Power pack
-
Nominal Capacity
-
Maximum Capacity
-
Charger type
-
Charging time (normal)
-
Charging time (quick)
-
Range
-
  report a mistake on this page