autoevolution
 

Segment: Enduro/Offroad
Production started year: 2018

BETA RR 4T 480 2018-Present

This bike expresses itself best on wide open spaces. Its characteristics are similar to the 430cc model but with even better output and torque range, suitable to more expert riders who are physically prepared.

BETA RR 4T 480 2018-Present

BETA RR 4T 480 480

engine specs
Type:Single cylinder, 4-stroke, liquid-cooled
Displacement:477.5 cm3
Bore X Stroke:3.9x2.4 in OR 99 mm
Compression Ratio:11.86:1
Horsepower:-/- KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:Synerject dual electronic injection
transmission specs
Gearbox:6-Speed
Clutch:Wet multi-disc
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Molybdenum steel with double cradle split above the exhaust port
Front Suspension:Hydraulic USD fork with 48 mm shaft
Rear Suspension:Monoshock with progressive compound lever
Front Brake:Wave disc 260 mm and double-piston floating caliper
Rear Brake:Wave disc 240 mm and single-piston floating caliper
dimension specs
Overall Length:85.8 in OR 2179 mm
Overall Width:31.8 in OR 808 mm
Seat Height:37 in OR 940 mm
Wheelbase:58.7 in OR 1491 mm
Ground Clearance:12.6 in OR 320 mm
Weight:262 lbs OR 119 kg
Fuel Capacity:2.6 gallons OR 9.8 L
tyres specs
Front:90/90 - 21
Rear:140/80 -18
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
  report a mistake on this page