autoevolution
 

BENELLI 250 Sport Special (1968-1969) Specs, Performance & Photos

Segment: Clasic
Production years: 1968, 1969

BENELLI 250 Sport Special 1968-1969 4 Photos
BENELLI 250 Sport Special (1968-1969)BENELLI 250 Sport Special (1968-1969)BENELLI 250 Sport Special (1968-1969)BENELLI 250 Sport Special (1968-1969)

The Benelli 250 Sport Special was a quarter-liter middle-weight motorcycle introduced by Benelli in 1968 alongside the smaller 125cc version. The bike was manufactured until 1973 and remained unchanged over its production time.

In 1968, the Italian motorcycle manufacturer introduced the Benelli 250 Sport Special, a larger displacement version of the Benelli 125 Sport Special. It was created for riders of all ages and experience levels.

The bike's aesthetic department was characterized by elements such as a round headlight with a chromed housing, analog instruments, a long fuel tank, a one-piece, two-up seat, side-mounted rear shocks, a single exhaust system with a silencer mounted on the right-hand side, a center stand, and cross-spoke wheels.

The bike was made around an open-cradle tubular steel frame with a telescopic fork on the front and a swingarm with side-mounted hydraulic shock absorbers on the rear, offering optimum handling capabilities.

Regarding stopping power, the motorcycle's 18-inch spoke wheels were fitted with a 175 mm drum braking unit on the front and a 125 mm drum braking unit on the rear, providing the braking performance needed to stop the bike in safe conditions.

As for power, the 1968 Benelli 250 Sport Special had installed a 245cc four-stroke air-cooled single-cylinder engine underneath its fuel tank, delivering an output power of 12 hp with maximum strength at 8,500 rpm.

BENELLI 250 Sport Special 1968-1969

BENELLI 250 Sport Special 245

engine specs
Type:air-cooled, four-stroke, horizontal single cylinder
Displacement:245 cm3
Bore X Stroke:2.9x2.2 in OR 74 mm
Compression Ratio:8.5:1
Horsepower:12/8500 KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:DellOrto UB 24BS2 carburetor
transmission specs
Gearbox:5-speed, manual
Clutch:wet multi-disc, manual
Primary Drive:-
Final Drive:chain
chassis specs
Frame:steel
Front Suspension:telescopic fork
Rear Suspension:dual shocks
Front Brake:175mm drum
Rear Brake:125mm drum
dimension specs
Overall Length:76.4 in OR 1941 mm
Overall Width:32.7 in OR 831 mm
Seat Height:28 in OR 711 mm
Wheelbase:49.6 in OR 1260 mm
Ground Clearance:5.9 in OR 150 mm
Weight:238 lbs OR 108 kg
Fuel Capacity:3.2 gallons OR 12.1 L
tyres specs
Front:2.75-18
Rear:3.00-18
  report a mistake on this page