If the signaling sound in your older generation Toyota Corolla is emitted faster than normal and the corresponding light indicator on the dashboard flashes faster it means that one or more of your signaling lights are busted.
The following tutorial will show how you can change the front signal light bulb. All you need is a Phillips screwdriver and a spare bulb. Here are the steps:
Open the hood and locate the screw holding the side signal lamp attached to the main headlight
Unscrew and remove the screw
Pull the signal lamp outward and then push it forward
Twist and remove the socket at its back to reveal the bulb
Twist and pull out the bulb
Replace it with the new one
Verify if the signal light works now
Put everything back as it was.
This is a DIY guide and, as such, you must be aware the procedures described here involve some risks. autoevolution cannot be held responsible for any possible damage that might result while following this guide.
Google News