Segment: Clasic
Production years: 1978, 1979, 1980, 1981, 1982, 1983
2 Photos
The new engine is very compactabout 7.2 kg (16 Ibs) lighter than the previous model. It features Suzuki's Power Reed valve dual induction system which increases engine breathing for better response through the rev range.
SUZUKI GT 250 X7 1978-1983
SUZUKI GT 250 X7 250
| engine specs | Type: | Two stroke, parallel twin, air cooled | Displacement: | 247 cm3 | Bore X Stroke: | 2.1x2.1 in OR 53 mm | Compression Ratio: | 7.5:1 | Horsepower: | 30/8000 KW(hp)/RPM | Torque: | 20/7000 lb-ft/RPM OR 27/7000 Nm/RPM | Fuel System: | 2 x Mikuni 26 mm carburetors |
|---|
| transmission specs | Gearbox: | 6-Speed | Clutch: | Wet, multiplate | Primary Drive: | - | Final Drive: | Chain |
|---|
| chassis specs | Frame: | - | Front Suspension: | Telescopic fork | Rear Suspension: | Twin shocks, springs | Front Brake: | Single disc | Rear Brake: | Drum |
|---|
| dimension specs | Overall Length: | 78.1 in OR 1984 mm | Overall Width: | 34.3 in OR 871 mm | Seat Height: | 31 in OR 787 mm | Wheelbase: | 50.8 in OR 1290 mm | Ground Clearance: | - | Weight: | 353 lbs OR 160 kg | Fuel Capacity: | 4 gallons OR 15.1 L |
|---|
| tyres specs | Front: | 2.75-18 | Rear: | 3.00-18 |
|---|
| power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
|---|