Segment: Trial
Production started year: 2016
The 2016 Sherco 300 ST, comes equipped with a 294cc engine, which is very large for a 2-stroke motor. Its seat measures 25.39 inches off the ground, low enough to make it suitable for youth riders.
engine specs | Type: | Two strokes Sherco proprietary design, nikasil coated cylinder | Displacement: | 294 cm3 | Bore X Stroke: | 3.1x2.4 in OR 79 mm | Compression Ratio: | - | Horsepower: | -/- KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | Carburetor Keihin 28 mm (1.10 in) |
---|
transmission specs | Gearbox: | 5-Speed sequential gearbox with security selector system to prevent false shifts. | Clutch: | Hydraulically activated multidisc in oil bath | Primary Drive: | Gears | Final Drive: | Chain |
---|
chassis specs | Frame: | Tubular section Chrome-moly | Front Suspension: | Tech 39 mm (1.54 in) hydraulic telescopic fork, 165 mm (6.50 in) travel | Rear Suspension: | Progressive link system with single adjustable shock absorber, 175 mm (6.89 in) travel Rear shok | Front Brake: | Hydraulically activated, floating 165mm | Rear Brake: | Hydraulically activated, floating 175mm |
---|
dimension specs | Overall Length: | - | Overall Width: | - | Seat Height: | 27 in OR 686 mm | Wheelbase: | 52 in OR 1321 mm | Ground Clearance: | 12.2 in OR 310 mm | Weight: | 150 lbs OR 68 kg | Fuel Capacity: | - |
---|
tyres specs | Front: | Morad 21” graphit anodized aluminum rim and aluminum hub with tube-type tire | Rear: | Morad 18” graphit anodized aluminum rim and aluminum hub with tubeless tire |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|