Segment: Clasic
Production years: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
The engine of the Piuma 50cc single-cylinder two-stroke engine that’s mated to a three-speed transmission - isn’t a world-beater by any means whatsoever. But where it lacked in power, it more than made up for by being a dual-purpose model with a hand gear change, universal tires.
DUCATI PIUMA 50 1961-1968
DUCATI PIUMA 50 50
| engine specs | Type: | Single cylinder, 2-stroke, piston-port, Air-cooled | Displacement: | 47.6 cm3 | Bore X Stroke: | 1.5x1.7 in OR 38 mm | Compression Ratio: | 6.3:1 | Horsepower: | 4.2/8600 KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | Carburetor: Dell`Orto UA 15S |
|---|
| transmission specs | Gearbox: | 3-Speed | Clutch: | Wet Multi-plate | Primary Drive: | - | Final Drive: | Chain |
|---|
| chassis specs | Frame: | Pressed stee | Front Suspension: | Telescopic fork | Rear Suspension: | Swingarm, twin shocks | Front Brake: | Drum | Rear Brake: | Drum |
|---|
| dimension specs | Overall Length: | 69.7 in OR 1770 mm | Overall Width: | - | Seat Height: | 29.9 in OR 759 mm | Wheelbase: | 45.7 in OR 1161 mm | Ground Clearance: | - | Weight: | 104 lbs OR 47 kg | Fuel Capacity: | - |
|---|
| tyres specs | Front: | 2.25x18 | Rear: | 2.25x18 |
|---|
| power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
|---|