Segment: Clasic
Production years: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Ducati decide in 1961, to release the Piuma 48. This bike comes witha 48cc single cylinder, two-stroke engine that was mated to a single three-speed unit gearbox.
engine specs | Type: | Single cylinder, 2-stroke, piston-port, Air-cooled | Displacement: | 47.6 cm3 | Bore X Stroke: | 1.5x1.7 in OR 38 mm | Compression Ratio: | 6.3:1 | Horsepower: | 5/5200 KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | Carburetor: Dell`Orto T4 12D1 |
---|
transmission specs | Gearbox: | 3-Speed | Clutch: | Wet Multi-plate | Primary Drive: | - | Final Drive: | Chain |
---|
chassis specs | Frame: | Pressed steel | Front Suspension: | Telescopic fork | Rear Suspension: | Swingarm, twin shocks | Front Brake: | Drum | Rear Brake: | Drum |
---|
dimension specs | Overall Length: | 69.7 in OR 1770 mm | Overall Width: | - | Seat Height: | 29.9 in OR 759 mm | Wheelbase: | 45.7 in OR 1161 mm | Ground Clearance: | - | Weight: | 104 lbs OR 47 kg | Fuel Capacity: | - |
---|
tyres specs | Front: | 2.25x18 | Rear: | 2.25x18 |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|