autoevolution
 

DUCATI 1198S Casey Stoner Phillip Island Replica (2010-2011) Specs, Performance & Photos

Segment: Sport / Super Sport
Production years: 2010, 2011

DUCATI 1198S Casey Stoner Phillip Island Replica  2010-2011 2 Photos
DUCATI 1198S Casey Stoner Phillip Island Replica  (2010-2011)DUCATI 1198S Casey Stoner Phillip Island Replica  (2010-2011)

In 2010, a French Ducati dealership decided to sell a limited number of Casey Stoner Ducati 1198S Phillip Island Replica machines to commemorate the 2009 race at Phillip Island. The bike was dressed in the same livery Stoner ran in his home race.

The 2010 special edition machine featured a Bloody's Paint Forbach paint job with additional top-end Ducati Performance components and a full titanium Ducati Corse 70 mm Termignoni exhaust system.

In other departments, the 2010 Ducati 1198S Casey Stoner Phillip Island Replica was identical to the standard S version, packing the same 1198cc engine, braking, and suspension systems.

The bike had its soul brought to life by a 1,198cc four-stroke V-twin liquid-cooled engine, fed by an Electronic Fuel Injection (EFI) system, boasting 170 hp with a peak force at 9,750 rpm and 132 Nm (97 lb-ft) torque at 8,000 rpm.

The power produced by the engine was handled by a six-speed manual transmission with a dry multi-place hydraulic clutch and a final chain drive, pushing the bike to 281 kph (175 mph).

In the suspension department, the bike packed a 43 mm fully adjustable upside-down Ohlins on the front with 120 mm wheel travel. On the rear, it had a fully adjustable Ohlins Shock absorber with 127 mm wheel travel.

Two 330 mm discs with four-piston calipers on the front and a 245 mm disc with a dual-piston caliper on the rear achieved the braking performance.

DUCATI 1198S Casey Stoner Phillip Island Replica 2010-2011

DUCATI 1198S Casey Stoner Phillip Island Replica 1198

engine specs
Type:liquid-cooled, four-stroke, 90-degree V-twin, DOHC, desmodromic 4 valves per cylinder
Displacement:1198 cm3
Bore X Stroke:4.2x2.7 in OR 107 mm
Compression Ratio:12.7:1
Horsepower:170/9750 KW(hp)/RPM
Torque:97/8000 lb-ft/RPM OR 132/8000 Nm/RPM
Fuel System:EFI
transmission specs
Gearbox:6-speed, manual
Clutch:dry, multiplate, hydraulic
Primary Drive:straight cut gears
Final Drive:chain
chassis specs
Frame:steel, trellis
Front Suspension:43mm Ohlins fully-adjustable upside-down fork, TiN-coated
Rear Suspension:Ohlins fully-adjustable monoshock with progressive linkage
Front Brake:dual 330mm discs, 4-piston calipers
Rear Brake:single 245mm disc, 2-piston caliper
dimension specs
Overall Length:82.7 in OR 2101 mm
Overall Width:-
Seat Height:32.3 in OR 820 mm
Wheelbase:56.3 in OR 1430 mm
Ground Clearance:-
Weight:373 lbs OR 169 kg
Fuel Capacity:4.2 gallons OR 15.9 L
tyres specs
Front:120/70 ZR17
Rear:190/55 ZR17
  report a mistake on this page