We’ve already gone through some maintenance light reseting on different cars so far and today we’ll show you how to reset one on a 2010 Scion xB.
Of course, before you do this, make sure that you’ve done all the periodical maintenance required because that’s why the light flashes at you in first place.
Tools required: two working hands.
Tools required: two working hands.
- Start the engine and observe that the Maint Req light is on
- Stop the engine and turn the ignition on but don’t start the engine
- Put the trip counter in odometer mode and then in trip mode again
- Turn the ignition off and press the odometer button
- Keep the button pressed and put the ignition back on
- With the button still pressed, wait until the tiny lines on the odometer disappear one by one and the zeros flash
- Release the button.