Changing light bulbs on a car is definitely a job you can do yourself without going to a service and wait for the mechanics.
Probably one of the easiest light bulbs you can change on a vehicle are the ones illuminating the license plate at the back and this tutorial will teach you how to perform this job on a 2007 Toyota Camry.
You will only need two spare bulbs (check vehicle’s owner manual for exact type) and a flat head screwdriver. Here’s how to do it:
Open up the trunk lid
Use the screwdriver to pop out all the plastic pins holding the trim panel on the inside of the lid
Remove the trimming panel to expose the wires and bulb sockets
Pull out the wires going to each light bulb socket
Grab the gray bulb socket and turn it clock-wise to unlock it, then pull it out
Pull out the busted bulb from the socket and insert the new one
Put everything back following the steps in reverse order.
Google News