Photo: Thunderbike
We’re not sure how many Harley-Davidson branded parts are needed for a custom motorcycle build to justify the use of the name Harley, but we’re pretty sure the deployment of a Screamin’ Eagle, even on a custom frame, is reason enough.
Despite this name, the bike in the gallery above is of course not a series production Harley. It is actually a custom creation coming from Germany, from the hands of a garage called Thunderbike – we’ve talked about this crew’s products at length over the past couple of months.
As most of the group’s other two-wheelers based on a custom frame, this too was meant as an exercise for seeing what can be “technically feasible with Thunderbike frames and parts.” That means tons of original hardware was fitted on the same frame, linked to a Harley engine, and made to work both visually and mechanically.
The skeleton of the motorcycle is a frame Thunderbike calls TBR-R. Inside it sits a Harley-Davidson Screamin’ Eagle 110 good for 100 ps and 160 Nm of torque. But that’s not the impressive part.
No matter your opinion on custom motorcycles so extreme, we’re pretty sure you can’t help but notice the massive wheels fitted on this one, especially the airplane turbine-shaped one at the back. Sized 26-inch front and 21-inch rear, they eclipse pretty much every single other part of the build.
As usual, the Ingo Kruse-painted bike rides on an air suspension that should give it a bit more ground clearance that shown in the photos above.
The Harley-Davidson Production-R by Thunderbike made its official debut way back in 2014 at the European Bike Week in Faak, Austria. We are not being told what happened to it since, but we’re pretty certain we’ve seen an evolution of the design language chosen for this bike making quite an impression on subsequent Thunderbike creations.
As most of the group’s other two-wheelers based on a custom frame, this too was meant as an exercise for seeing what can be “technically feasible with Thunderbike frames and parts.” That means tons of original hardware was fitted on the same frame, linked to a Harley engine, and made to work both visually and mechanically.
The skeleton of the motorcycle is a frame Thunderbike calls TBR-R. Inside it sits a Harley-Davidson Screamin’ Eagle 110 good for 100 ps and 160 Nm of torque. But that’s not the impressive part.
No matter your opinion on custom motorcycles so extreme, we’re pretty sure you can’t help but notice the massive wheels fitted on this one, especially the airplane turbine-shaped one at the back. Sized 26-inch front and 21-inch rear, they eclipse pretty much every single other part of the build.
As usual, the Ingo Kruse-painted bike rides on an air suspension that should give it a bit more ground clearance that shown in the photos above.
The Harley-Davidson Production-R by Thunderbike made its official debut way back in 2014 at the European Bike Week in Faak, Austria. We are not being told what happened to it since, but we’re pretty certain we’ve seen an evolution of the design language chosen for this bike making quite an impression on subsequent Thunderbike creations.
Google News