Developed, tested, and validated for the mid-engine Corvette Stingray, the Performance Design pTR Carbon-Fiber Intake Manifold is now available to purchase through Lingenfelter Performance Engineering. This mod isn’t cheap, though, as it retails from $2,100 at the time of writing.
The manifold doesn’t fit convertible models, and the manufacturer highlights that no calibration is required. The five-layer carbon fiber is joined by glass-reinforced nylon, and Lingenfelter also mentions complete ECM integration using the factory connectors. Tested at more than 50 pounds per square inch, the manifold promises 25 more horsepower at the rear wheels as long as you upgrade the throttle body to a 95-millimeter unit.
As a brief refresher, the bone-stock Corvette Stingray runs an 87-millimeter throttle body and a nylon intake manifold supplied by General Motors-owned ACDelco. Lingenfelter says that further power improvements can be expected in conjunction with a cat-back exhaust from Corsa Performance, which retails from $2,000 to $3,400 depending on the specification. More to the point, customers can expect anything between 18 and 19 horsepower.
While on the subject of natural aspiration, the biggest of the Big Three in Detriot will improve the mid-engine Corvette for the 2023 model year with a flat-plane crankshaft V8. The LT6 as the 5.5-liter engine is called is derived from the LT5 that powers the C8.R endurance racer that dominated the GTLM class in the 2020 season of the IMSA SportsCar Championship.
Teased last month and confirmed to premiere this fall, the Chevrolet Corvette Z06 can be considered an indirect successor for the Ferrari 458 Italia in terms of aural pleasure. The rev-happy powerplant is reportedly good for 617 horsepower, and a dual-clutch transmission channels the goodies to the rear wheels. Confirmed with 345/25 by 21-inch steamrollers out back, the wide-bodied sports car is further expected to cost around $80,000.
On that note, would you wait for the all-new Z06 or spend your hard-earned cash on a Stingray and Lingenfelter Performance Engineering upgrades?
As a brief refresher, the bone-stock Corvette Stingray runs an 87-millimeter throttle body and a nylon intake manifold supplied by General Motors-owned ACDelco. Lingenfelter says that further power improvements can be expected in conjunction with a cat-back exhaust from Corsa Performance, which retails from $2,000 to $3,400 depending on the specification. More to the point, customers can expect anything between 18 and 19 horsepower.
While on the subject of natural aspiration, the biggest of the Big Three in Detriot will improve the mid-engine Corvette for the 2023 model year with a flat-plane crankshaft V8. The LT6 as the 5.5-liter engine is called is derived from the LT5 that powers the C8.R endurance racer that dominated the GTLM class in the 2020 season of the IMSA SportsCar Championship.
Teased last month and confirmed to premiere this fall, the Chevrolet Corvette Z06 can be considered an indirect successor for the Ferrari 458 Italia in terms of aural pleasure. The rev-happy powerplant is reportedly good for 617 horsepower, and a dual-clutch transmission channels the goodies to the rear wheels. Confirmed with 345/25 by 21-inch steamrollers out back, the wide-bodied sports car is further expected to cost around $80,000.
On that note, would you wait for the all-new Z06 or spend your hard-earned cash on a Stingray and Lingenfelter Performance Engineering upgrades?