autoevolution
 

YAMAHA XT 660Z Tenere (2012-2013) Specs, Performance & Photos

Segment: Enduro/Offroad
Production years: 2012, 2013

YAMAHA XT 660Z Tenere 2012-2013 8 Photos
YAMAHA XT 660Z Tenere (2012-2013)YAMAHA XT 660Z Tenere (2012-2013)YAMAHA XT 660Z Tenere (2012-2013)YAMAHA XT 660Z Tenere (2012-2013)YAMAHA XT 660Z Tenere (2012-2013)YAMAHA XT 660Z Tenere (2012-2013)YAMAHA XT 660Z Tenere (2012-2013)YAMAHA XT 660Z Tenere (2012-2013)

In 2012, the Japanese motorcycle manufacturer released the Yamaha XT 660Z Tenere, a motorcycle that packed the same technical, visual, and performance specifications as the previous model without any significant modifications whatsoever.

The Yamaha XT 660Z Tenere was a dual-sports motorcycle manufactured by Yamaha from 2008 until 2016. The bike was powered by a 660cc single-cylinder engine made by Minarelli. The XT 660R, XT 660X, MT-03, Jawa 660 Sportard, Jawa 660 Vintage, and Aprilia Pegaso 650 Trail also used the engine.

It was fitted with factory-installed standard features, such as a single headlight unit, a small windscreen, an engine cover, side covers, a one-piece dual seat with passenger grab rails, a high-mounted exhaust system, and wire-spoke wheels.

As for the power figures, the 2012 Yamaha XT 660Z Tenere had installed a 659cc four-stroke single-cylinder liquid-cooled engine that delivered 48 hp at 6,000 rpm and 58 Nm (43 lb-ft) torque at 5,250 rpm.

Suspension-wise, the 2012 XT 660Z Tenere has a 43 mm telescopic fork on the front, providing 210 mm of travel, and a monocross system on the rear with 200 mm of travel, delivering optimum suspension performance and handling.

The bike's braking performance was achieved by two 298 mm discs coupled to a dual-piston caliper mounted on the front end and a 245 mm disc with a single-piston caliper fitted on the rear wheel, delivering optimum stopping power.

YAMAHA XT 660Z Tenere 2012-2013

YAMAHA XT 660Z Tenere 660

engine specs
Type:Single cylinder, liquid-cooled, 4-stroke, SOHC, 4-valves
Displacement:660 cm3
Bore X Stroke:3.9x3.3 in OR 99 mm
Compression Ratio:10.0:1
Horsepower:48/6000 KW(hp)/RPM
Torque:43/0 lb-ft/RPM OR 58/0 Nm/RPM
Fuel System:Electronic Injection
transmission specs
Gearbox:Constant Mesh, 5-speed
Clutch:Wet multi-disc, manual
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Steel tube diamond shaped
Front Suspension:Telescopic forks
Rear Suspension:Linked monoshock with spring preload adjustment
Front Brake:Hydraulic dual disc, 298 mm
Rear Brake:Hydraulic single disc, 245 mm
dimension specs
Overall Length:88.4 in OR 2245 mm
Overall Width:35.3 in OR 897 mm
Seat Height:35.3 in OR 897 mm
Wheelbase:59.1 in OR 1501 mm
Ground Clearance:10.2 in OR 259 mm
Weight:459 lbs OR 208 kg
Fuel Capacity:6.1 gallons OR 23.1 L
tyres specs
Front:90/90-21 M/C
Rear:130/80-17 M/C
  report a mistake on this page