autoevolution
 

TRIUMPH Daytona 675 JPS LE (2007) Specs, Performance & Photos

Segment: Sport / Super Sport
Production started year: 2007

TRIUMPH Daytona 675 JPS LE 2007 2 Photos
TRIUMPH Daytona 675 JPS LE (2007)TRIUMPH Daytona 675 JPS LE (2007)

The Triumph Daytona 675 was a sports motorcycle manufactured in 2006 as a replacement for the Daytona 650 and continued production until 2016, when it was succeeded by the Triumph Daytona 765.

The Daytona 675 was the smallest model in the Triumph triple series and proved to be very light, nimble, powerful, and quick. Also, the bike had great success against the Japanese 600cc competition.

In 2007, the British motorcycle manufacturer launched the Triumph Daytona 675 JPS Limited Edition, a sports motorcycle that featured a JPS-inspired paint scheme. The bike was made in a limited run, counting only five units at $11,100 each. In addition, the bike was available with several Triumph parts and accessories and other components, such as the Prezzo Racing brake and clutch levers.

The bike packed standard features in the visual department, such as a full fairing, a medium windshield, a single seat with lumbar support, an under-seat-mounted exhaust system, and five-spoke lightweight wheels.

Underneath its full fairing, the 2007 Triumph Daytona 675 JPS LE had installed a 675cc four-stroke three-cylinder liquid-cooled engine with a fuel injection system in charge, delivering 123 hp at 12,500 rpm and 73 Nm (54 lb-ft) torque at 11,750 rpm.

With a dry weight of only 166 kg (365 lbs) and a six-speed manual transmission with a wet, multi-plate clutch, the motorcycle reached 255 kph (154 mph).

TRIUMPH Daytona 675 JPS LE 2007

TRIUMPH Daytona 675 JPS LE 675

engine specs
Type:Liquid-cooled, four stroke, inline 3-cylinder, DOHC
Displacement:675 cm3
Bore X Stroke:2.91x2.05 in OR 74 mm
Compression Ratio:12.5:1
Horsepower:123/12500 KW(hp)/RPM
Torque:54/11750 lb-ft/RPM OR 73/11750 Nm/RPM
Fuel System:Electronic Injection
transmission specs
Gearbox:6-Speed
Clutch:Wet, multiplate
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Aluminum beam twin spar, swingarm braced twin sided, aluminum alloy with adjustable pivot position
Front Suspension:41mm USD forks with adjustable preload, rebound and compression damping
Rear Suspension:Monoshock with piggy back reservoir
Front Brake:2x 308mm discs 4 piston calipers
Rear Brake:Single 220mm disc 1 piston caliper
dimension specs
Overall Length:79.5 in OR 2019 mm
Overall Width:28 in OR 711 mm
Seat Height:32.7 in OR 831 mm
Wheelbase:54.9 in OR 1394 mm
Ground Clearance:-
Weight:408 lbs OR 185 kg
Fuel Capacity:4.6 gallons OR 17.4 L
tyres specs
Front:120/70 ZR17
Rear:180/55 ZR17
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
  report a mistake on this page