autoevolution
 

TRIUMPH Bonneville SE (2009-2010) Specs, Performance & Photos

Segment: Custom/Cruiser
Production years: 2009, 2010

TRIUMPH Bonneville SE 2009-2010 3 Photos
TRIUMPH Bonneville SE (2009-2010)TRIUMPH Bonneville SE (2009-2010)TRIUMPH Bonneville SE (2009-2010)

The 2010 Bonneville SE is a marvelous piece of retro bike design mixed with present day engineering, a two-wheeler which not only brings back the good old days of biking, but which also carries on a most amazing manufacturer heritage. Faithful to the design of the bikes in the late 50's, the Bonneville SE birngs in the acclaimed two-tone paint, the large chrome tank badge, polished engine cases and retro instrumentation.

On the tech side, it comes with EFI cleverly disguised as traditional carbs, contrast cut cast wheels, updated brakes and a lower seat which only makes it more confidence-inspiring for more riders.

TRIUMPH Bonneville SE 2009-2010

TRIUMPH Bonneville SE 865

engine specs
Type:4-stroke air-cooled, DOHC, parallel-twin, 360-degree firing interval
Displacement:865 cm3
Bore X Stroke:3.5x2.7 in OR 89 mm
Compression Ratio:9.2:1
Horsepower:67/7500 KW(hp)/RPM
Torque:50/5800 lb-ft/RPM OR 68/5800 Nm/RPM
Fuel System:multipoint sequential electronic fuel injection with SAI
transmission specs
Gearbox:5-speed
Clutch:wet, multiplate
Primary Drive:-
Final Drive:X ring chain
chassis specs
Frame:tubular steel cradle
Front Suspension:Kayaba 41mm forks, 120mm travel
Rear Suspension:Kayaba chromed spring twin shocks with adjustable preload, 100mm rear wheel travel
Front Brake:Single 310mm disc, Nissin 2 piston floating caliper
Rear Brake:Single 255mm disc, Nissin 2 piston floating caliper
dimension specs
Overall Length:83.2 in OR 2113 mm
Overall Width:31.1 in OR 790 mm
Seat Height:29.1 in OR 739 mm
Wheelbase:58.6 in OR 1488 mm
Ground Clearance:-
Weight:495 lbs OR 225 kg
Fuel Capacity:4.2 gallons OR 15.9 L
tyres specs
Front:110/70 R17
Rear:130/80 R17
  report a mistake on this page