Segment: Enduro/Offroad
Production started year: 2015
The new SWM SuperDual has more than just a passing resemblance to the 2012 Husqvarna TE630. Underneath the new bodywork is the same water-cooled and fuel-injected 600cc DOHC single pumping out roughly 50 horsepower, with a wide-ratio 6-speed to match — the same motor to be used in the new AJP PR7. The SWM SuperDual runs on Marzochi front forks and Sachs rear shock, providing 8.3 inches (210mm) of suspension travel in the front and 10.6 inches (270 mm) in the rear.
SWM has confirmed that the SuperDual will first become available in Europe, Australia and New Zealand, then in the second half of 2016 it will arrive in the USA.
engine specs | Type: | Single cylinder, 4-stroke, liquid cooled | Displacement: | 600 cm3 | Bore X Stroke: | 3.9x3.0 in OR 99 mm | Compression Ratio: | 12.4:1 | Horsepower: | -/- KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | Electronic Fuel Injection |
---|
transmission specs | Gearbox: | 6-Speed | Clutch: | Wet Multi-plate | Primary Drive: | - | Final Drive: | Chain |
---|
chassis specs | Frame: | Single beam double cradle main frame | Front Suspension: | Upside-Down fork with dumping adjustment | Rear Suspension: | Soft Damp monoshock absorber with adjustment | Front Brake: | Single Disc | Rear Brake: | Single Disc |
---|
dimension specs | Overall Length: | - | Overall Width: | - | Seat Height: | 33.85 in OR 860 mm | Wheelbase: | 57.68 in OR 1465 mm | Ground Clearance: | - | Weight: | 384 lbs OR 174 kg | Fuel Capacity: | 5 gallons OR 18.9 L |
---|
tyres specs | Front: | 110/80 – 19 | Rear: | 140/80 – 17 |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|