Segment: Enduro/Offroad
Production started year: 2015
The RS is heavily based on the old Husqvarna TE630. We happen to know a bit about that model Husky and we have a very high opinion of the bike. What gets us so excited about the SWM is that, if as it appears on paper this bike is essentially a refined TE630, it’ll mean there’s once again on the Australian market a 650cc single with a strong engine, good suspension, quality brakes, fuel injection and no electronics – except for the fuel injection.
engine specs | Type: | Single cylinder, 4-stroke, liquid cooled | Displacement: | 600 cm3 | Bore X Stroke: | 3.9x3.0 in OR 99 mm | Compression Ratio: | 12.4:1 | Horsepower: | -/- KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | Electronic Fuel Injection |
---|
transmission specs | Gearbox: | 6-Speed constant mesh | Clutch: | Wet Multi-plate | Primary Drive: | - | Final Drive: | Chain |
---|
chassis specs | Frame: | High strenght steel single beam double cradle main frame | Front Suspension: | Marzocchi fork with 210mm of travel | Rear Suspension: | Sachs shock with 270mm of travel | Front Brake: | Upside-down telescopic hydraulic fork | Rear Brake: | Single hydraulic shock absorber |
---|
dimension specs | Overall Length: | 89.8 in OR 2281 mm | Overall Width: | 32.3 in OR 820 mm | Seat Height: | 35.4 in OR 899 mm | Wheelbase: | 59.3 in OR 1506 mm | Ground Clearance: | 9.8 in OR 249 mm | Weight: | 337 lbs OR 153 kg | Fuel Capacity: | 3.2 gallons OR 12.1 L |
---|
tyres specs | Front: | 90/90-21 | Rear: | 140/80-18 |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|