Segment: Enduro/Offroad
Production started year: 2016
My SWM RS 125 R has a steel tube frame with a single upper backbone and a double lower cradle. The bike rides on knobby tires, size 90/90-21 in front, 140/80-18 in back, and the classic spoke-type wheels have aluminum rims. Disc brakes are by Brembo: a 260mm front rotor has a two-piston floating caliper, a 220mm rear teams with a single-pistonfloating caliper.
engine specs | Type: | Single cylinder, 4-stroke, Air-cooled | Displacement: | 125 cm3 | Bore X Stroke: | 2.28x1.85 in OR 58 mm | Compression Ratio: | 12.8:1 | Horsepower: | -/- KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | EFI |
---|
transmission specs | Gearbox: | 6-Speed | Clutch: | Wet Multi-plate | Primary Drive: | - | Final Drive: | Chain |
---|
chassis specs | Frame: | High strenght steel single beam double cradle main frame; steel rear frame | Front Suspension: | Upside-Down telescopic hydraulic fork with forward axle | Rear Suspension: | Progressive Soft Damp type with single hydraulic shock absorbe | Front Brake: | Fixed disc, with hydraulic control and floating caliper | Rear Brake: | Floating disc, with hydraulic control and floating caliper |
---|
dimension specs | Overall Length: | 88.03 in OR 2236 mm | Overall Width: | 32.28 in OR 820 mm | Seat Height: | 37.4 in OR 950 mm | Wheelbase: | 57.67 in OR 1465 mm | Ground Clearance: | 10.12 in OR 257 mm | Weight: | 238 lbs OR 108 kg | Fuel Capacity: | 1.9 gallons OR 7.2 L |
---|
tyres specs | Front: | 80/90-21 K774F | Rear: | 110/80-18 K774 |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|