OSSA EXPLORER 280 (2014-2015) Specs, Performance & Photos

Segment: Trial
Production years: 2014, 2015

OSSA EXPLORER 280 2014-2015

The Explorer 280 is powered by a 248cc, 2-Stroke, liquid-cooled, single cylinder engine. With a cylinder bore of 2.85 in and stroke of 2.36 in, its motor is oversquare, meaning that the cylinder bore (width) is greater than the stroke (length). This makes the engine more powerful than one of similar displacement with a smaller bore. The engine is supported by electronic fuel injection which ensures smooth and timely fuel delivery. Electronic ignition makes starting your bike a breeze and ensures a consistent throttle response.

OSSA EXPLORER 280 2014-2015


engine specs
Type:Two-stroke single cylinder inverted admission direct reed crankcase
Displacement:272.2 cm3
Bore X Stroke:3.0x2.4 in OR 76 mm
Compression Ratio:-
Horsepower:-/- KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:EFI Kokusan Battery-less System
transmission specs
Primary Drive:Gears
Final Drive:Chain
chassis specs
Frame:Tubular profile CR-Mo steel with pipe of cast aluminum and forged aluminum lower
Front Suspension:Olle hydraulic fork with 40 mm sliders. Adjustable rebound and compression damping
Rear Suspension:Progressive hydraulic monoshock Olle with adjustable preload
Front Brake:Disc diameter 185 mm 4-piston calliper
Rear Brake:Disc diameter 180 mm 2-piston calliper
dimension specs
Overall Length:-
Overall Width:-
Seat Height:32.3 in OR 820 mm
Weelbase:52.3 in OR 1328 mm
Ground Clearance:13.4 in OR 340 mm
Weight:175 lbs OR 79 kg
Fuel Capacity:2 gallons OR 7.6 L
tyres specs
Front:2.75 x21
Rear:4.00 x18
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
  report a mistake on this page