KTM 390 DUKE (2017-Present) Specs, Performance & Photos

Segment: Naked / Road
Production started year: 2017

KTM 390 DUKE 2017-Present 5 Photos
KTM 390 DUKE (2017-Present)KTM 390 DUKE (2017-Present)KTM 390 DUKE (2017-Present)KTM 390 DUKE (2017-Present)KTM 390 DUKE (2017-Present)

The KTM 390 Duke was a standard naked bike produced by KTM from 2013 until the present (2023). The bike was assembled by Bajaj Auto and KTM Asia Motorcycle Manufacturing Inc.

The motorcycle was developed by Bajaj Auto and KTM engineers in a joint program. The concept was developed in Austria, and its design and final product development were done by Bajaj in India.

In 2017, the Austrian motorcycle manufacturer launched the KTM 390 Duke, a machine with a state-of-the-art single-cylinder engine with twin overhead camshafts that once again underlined KTM's development strength.

Over its production years, it received several updates, like the one in 2017, comprising a larger front brake disc, a modified headlight with LED, a TFT display with phone paring capability, an increased seat height, a smaller wheelbase, manually-adjustable brake and clutch levers, a larger fuel tank, and a ride-by-wire system.

In the performance department, the 2017 KTM 390 Duke had installed a 373cc four-stroke liquid-cooled one-cylinder engine underneath its fuel tank, managed by an Electronic Fuel Injection (EFI) system. As for the power figures, the engine delivered 44 hp at 9,500 rpm and 35 Nm (26 lb-ft) torque at 7,000 rpm.

Its engine was married to a six-speed transmission with a wet multi-plate manual clutch that redirected the power to the rear wheel via a final chain drive.

KTM 390 DUKE 2017-Present

KTM 390 DUKE 390

engine specs
Type:Single cylinder, four stroke, liquid cooled
Displacement:373 cm3
Bore X Stroke:3.5x2.4 in OR 89 mm
Compression Ratio:12.6:1
Horsepower:44/9500 KW(hp)/RPM
Torque:26/7000 lb-ft/RPM OR 35/7000 Nm/RPM
Fuel System:EFI
transmission specs
Clutch:Wet Multi-disc
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Steel trellis frame, powder coated
Front Suspension:WP upside-down
Rear Suspension:WP monoshock
Front Brake:Single disc 320 mm
Rear Brake:Single disc 230 mm
dimension specs
Overall Length:78.8 in OR 2002 mm
Overall Width:34.4 in OR 874 mm
Seat Height:31.5 in OR 800 mm
Wheelbase:53.8 in OR 1367 mm
Ground Clearance:6.7 in OR 170 mm
Weight:351 lbs OR 159 kg
Fuel Capacity:2.9 gallons OR 11.0 L
tyres specs
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
  report a mistake on this page