autoevolution
 

KAWASAKI NINJA H2 CARBON (2018-Present) Specs, Performance & Photos

Segment: Sport / Super Sport
Production started year: 2018

KAWASAKI NINJA H2 CARBON 2018-Present 10 Photos
KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)KAWASAKI NINJA H2 CARBON (2018-Present)

The Kawasaki Ninja H2 was a street-legal version of the H2R model, which shared many components, such as the 998cc engine, the supercharger, the trellis frame, aerodynamic bodywork, single-sided swingarm, powerful Brembo brakes, and compact superbike dimensions.

The bike featured a supercharger that fed the engine with cool, pressurized air, was designed to allow high-efficiency operation over a wide range of conditions and didn't require a large, heavy intercooler to cool the compressed air.

In 2018, the Japanese motorcycle manufacturer released the Kawasaki Ninja H2 Carbon, a limited-release street-legal production motorcycle available only in select markets and for a short period of time.

The bike featured a 998cc engine designed to handle stress better than a same-size aspirated engine and featured cast pistons instead of forged ones that provided better strength and handled the high temperature generated by the supercharged engine much better.

As or the power figures, the 2018 Kawasaki Ninja H2 Carbon took its thrust from a 998cc four-stroke four-cylinder liquid-cooled supercharged engine that delivered an output power of 200 hp with a peak at 12,500 rpm and 133 Nm (98 lb-ft) of torque available at 10,500 rpm.

The braking system matched the performance of the bike with two 330 mm Brembo discs and four-piston Brembo calipers on the front and a 250 mm disc squeezed by a two-piston Brembo caliper on the rear.

KAWASAKI NINJA H2 CARBON 2018-Present

KAWASAKI NINJA H2 CARBON 1000

engine specs
Type:4-stroke, 4-cylinder, DOHC, 4-valve, liquid-cooled, supercharged
Displacement:998 cm3
Bore X Stroke:3.0x2.2 in OR 76 mm
Compression Ratio:8.5:1
Horsepower:200/12500 KW(hp)/RPM
Torque:98/10500 lb-ft/RPM OR 133/10500 Nm/RPM
Fuel System:DFI w/50mm throttle bodies (4) with dual injection
transmission specs
Gearbox:6-Speed, return, dog-ring
Clutch:-
Primary Drive:-
Final Drive:Sealed chain
chassis specs
Frame:Trellis, high-tensile steel, with swingarm mounting plate
Front Suspension:43mm inverted fork with rebound and compression damping, spring preload adjustability and top-out springs/4.7 in
Rear Suspension:New Uni-Trak, Öhlins TTX36 gas charged shock with piggyback reservoir, compression and rebound damping and spring preload adjustability, and top-out spring/5.3 in
Front Brake:Dual radial-mount, opposed 4-piston calipers, dual semi-floating 330mm discs, KIBS ABS
Rear Brake:Opposed 2-piston calipers, single 250mm disc, KIBS ABS
dimension specs
Overall Length:82.1 in OR 2085 mm
Overall Width:30.3 in OR 770 mm
Seat Height:32.5 in OR 826 mm
Wheelbase:57.3 in OR 1455 mm
Ground Clearance:5.1 in OR 130 mm
Weight:525 lbs OR 238 kg
Fuel Capacity:4.5 gallons OR 17.0 L
tyres specs
Front:120/70 ZR17 (58W)
Rear:200/55 ZR17 (78W)
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
  report a mistake on this page