autoevolution
 

KAWASAKI MULE 4010 4x4 Camo (2008-2009) Specs, Performance & Photos

Segment: ATV/Quad
Production years: 2008, 2009

KAWASAKI MULE 4010 4x4 Camo 2008-2009 2 Photos
KAWASAKI MULE 4010 4x4 Camo (2008-2009)KAWASAKI MULE 4010 4x4 Camo (2008-2009)

The 2009 MY MULE 4010 4x4 Camo receives a Realtree Hardwoods Green HD wrap complementing other improvements, such as power steering or fuel injection. However, these two technical features are also present in the base version. With the added electronic power steering system, riding the MULE 4010 4x4 Camo in tight spaces and at low speed is now easier and less fatiguing even after a day's work.

Power comes from a 617cc liquid-cooled industrial v-twin engine mated to an automated transmission with selectable 4WD and a dual-mode differential. The UTV has forward high and low gears, as well as a reverse one, independent front suspensions and self-adjusting sealed hydraulic brakes.

KAWASAKI MULE 4010 4x4 Camo 2008-2009

KAWASAKI MULE 4010 4x4 Camo 617

engine specs
Type:Four-stroke, liquid-cooled, overhead valve V-twin
Displacement:617 cm3
Bore X Stroke:3.0x2.7 in OR 76 mm
Compression Ratio:10.3:1
Horsepower:-/- KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:EFI
transmission specs
Gearbox:Automatic, L, H, reverse
Clutch:Automatic clutch
Primary Drive:-
Final Drive:Shaft, 4WD
chassis specs
Frame:Steel
Front Suspension:Independent, MacPherson strut / 3.9 in.
Rear Suspension:Semi-independent, De Dion axle with leaf springs and shocks / 2.8 in.
Front Brake:Four-wheel hydraulic drums, sealed
Rear Brake:Four-wheel hydraulic drums, sealed
dimension specs
Overall Length:118.3 in OR 3005 mm
Overall Width:-
Seat Height:-
Wheelbase:73.6 in OR 1869 mm
Ground Clearance:6.9 in OR 175 mm
Weight:1429 lbs OR 648 kg
Fuel Capacity:6.4 gallons OR 24.2 L
tyres specs
Front:23x11-10 tubeless
Rear:23x11-10 tubeless
  report a mistake on this page