autoevolution
 

BMW R50 (1955-1960) Specs, Performance & Photos

Segment: Clasic
Production years: 1955, 1956, 1957, 1958, 1959, 1960

BMW R50 1955-1960
BMW R50 (1955-1960)

In early 1955, at the Brussels Motor Show, BMW presented two motorcycles, the R50 and R69, which were the first models built by BMW that had a full-swing chassis. The engine was taken from the R51/3 model which was its predecessor and offered tourers sufficient power with an official 26 hp.

On the front, the model's telescopic fork was replaced by a long swingarm with spring struts and oil pressure dampers and instead of the plunger telescopic suspension at the rear, the model also used a long swingarm with spring struts and oil dampers with the cardan shaft neatly supported in the right-hand swingarm.

The 1950 BMW R50 model impressed with its chassis and excellent driving stability in all driving situations, either solo or trailered operations. The model was not only popular with the sporty touring community but also preferred by the government agencies like police forces across the world, which ensured the continuity of the BMW motorcycle department in the 1950s and 1960s.

The flat-twin engine that powered the R50 model had a displacement of 494cc with a power output of 26 hp with a peak at 5.800 rpm and was equipped with a four-speed manual transmission. Both engine and transmission working together made it possible for the bike to hit a top speed of 140 kph (86 mph).

In terms of stopping power, the model packed on the front wheel a 200 mm duplex full hub drum unit and on the rear wheel a 200 mm simplex full hub drum unit.

With standard features such as a single seat, wire-spoked wheels, a large headlamp, full fenders, and mid-mounted footpegs, the bike tipped the scale at 195 kg (430 lbs) and with the original BMW sidecar attached at 320 kg (705 lbs).

BMW R50 1955-1960

BMW R50 494

engine specs
Type:air-cooled, four-stroke, boxer twin cylinder, 2 valves per cylinder
Displacement:494 cm3
Bore X Stroke:2.7x2.7 in OR 69 mm
Compression Ratio:6.8:1
Horsepower:26/5800 KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:2xBing carburetors
transmission specs
Gearbox:4-speed, manual
Clutch:dry, single plate
Primary Drive:-
Final Drive:shaft
chassis specs
Frame:steel
Front Suspension:telescopic fork
Rear Suspension:long swing arm with suspension units and oil pressure shock absorbers
Front Brake:200mm drum
Rear Brake:200mm drum
dimension specs
Overall Length:-
Overall Width:-
Seat Height:-
Wheelbase:-
Ground Clearance:-
Weight:430 lbs OR 195 kg
Fuel Capacity:4.5 gallons OR 17.0 L
tyres specs
Front:3.50 -18
Rear:3.50 -18
  report a mistake on this page