Segment: Enduro/Offroad
Production started year: 2016

BETA RR ENDURO 50 SPORT 2016-Present 2 Photos
BETA RR ENDURO 50 SPORT (2016-Present)BETA RR ENDURO 50 SPORT (2016-Present)

The 2016 RR Enduro 50 Sport is built around a 49.7 cc, single-cylinder, 2-stroke, liquid cooled engine with lamellar induction in the crankcase. The engine’s power is kept under control by a six speed transmission with wet, multi-disc clutch. The unit is mounted on a steel double cradle frame which sits on a front hydraulic fork with 37 mm shaft and a rear monoshock.

BETA RR ENDURO 50 SPORT 2016-Present


engine specs
Type:Single cylinder, foru stroke, liquid cooled
Displacement:49.7 cm3
Bore X Stroke:1.6x1.5 in OR 41 mm
Compression Ratio:-
Horsepower:-/- KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:Carburetor
transmission specs
Clutch:Wet multi discs
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Double cradle steel closed
Front Suspension:Hydraulic fork rods 40 mm
Rear Suspension:Monoshock
Front Brake:Single disc 260 mm
Rear Brake:Single disc 220 mm
dimension specs
Overall Length:82.1 in OR 2085 mm
Overall Width:32.1 in OR 815 mm
Seat Height:-
Weelbase:55.7 in OR 1415 mm
Ground Clearance:-
Weight:201 lbs OR 91 kg
Fuel Capacity:2 gallons OR 7.6 L
tyres specs
Front:80/90 - 21
Rear:110/80 - 18
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
  report a mistake on this page