APRILIA SXV 550 (2008-2011) Specs, Performance & Photos

Segment: Enduro/Offroad
Production years: 2008, 2009, 2010, 2011

APRILIA SXV 550 2008-2011 2 Photos
APRILIA SXV 550 (2008-2011)APRILIA SXV 550 (2008-2011)

In 2008, the Italian motorcycle maker released the Aprilia SXV 550, the larger-displacement version of the SXV 450. Compared to its smaller sister, the Aprilia SXV 550 was similar in appearance and delivered more power.

The Aprilia SXV, alongside the RXV, was a dual-sports supermoto motorcycle manufactured by Aprilia from 2006 to 2010. The SXV was available in a 450cc version and a larger 550cc displacement.

In the visual department, the motorcycle packed standard features, such as a small headlight integrated into a tiny cowl, a high-mounted front fender, an engine cover, a one-piece dual seat, an under-seat-mounted exhaust system, and wire-spoke wheels shod with road tires.

The 2008 Aprilia SXV 550 was powered by a 549cc four-stroke liquid-cooled V-twin engine mounted underneath its fuel tank and fed by a fuel injection system. The bike delivered 70 hp, sent to the rear axle through a five-speed manual transmission and a final chain drive, pushing the motorcycle to 180 kph (112 mph).

The braking power was achieved by a 320 mm brake disc mounted on the front wheel and assisted by a four-piston caliper. The rear wheel was fitted with a 240 mm brake disc squeezed by a two-piston caliper.

For suspension, the motorcycle packed a 48 mm adjustable upside-down fork on the front and an adjustable monoshock on the rear, providing optimum suspension performance and handling capabilities.

APRILIA SXV 550 2008-2011


engine specs
Type:Four stroke, V-twin, liquid cooled
Displacement:549 cm3
Bore X Stroke:-
Compression Ratio:12.0:1
Horsepower:70/0 KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:Injection. Integrated electronic engine management system controlling ignition and fuel injection
transmission specs
Clutch:Wet multi plate
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Steel perimeter frame with aluminium alloy vertical members
Front Suspension:upside down fork with two adjustments
Rear Suspension:Box section aluminium swingarm with cast body.Hydraulic monoshock with compression and rebound adjustment
Front Brake:Single disc
Rear Brake:Single disc
dimension specs
Overall Length:87.5 in OR 2223 mm
Overall Width:31.5 in OR 800 mm
Seat Height:36.1 in OR 917 mm
Wheelbase:58.9 in OR 1496 mm
Ground Clearance:12.5 in OR 318 mm
Fuel Capacity:2.1 gallons OR 7.9 L
tyres specs
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
  report a mistake on this page