autoevolution
 

APRILIA SR50 (2010-2011) Specs, Performance & Photos

Segment: Scooter
Production years: 2010, 2011

APRILIA SR50 2010-2011 3 Photos
APRILIA SR50 (2010-2011)APRILIA SR50 (2010-2011)APRILIA SR50 (2010-2011)

In 2010, the Italian motorcycle manufacturer released the Aprilia SR50, an aggressive-looking scooter introduced in 1992. In a restricted state, the scooter reached a top speed of 45-50 kph (28-31 mph), while unrestricted it reached 85-90 kph (53-56 mph).

The Aprilia SR50 was a scooter made by Aprilia in 1992 and manufactured until 2021. Over 800,000 units were sold in 1992, and several engines were used, sourced from Morini, Piaggio, and Minarelli.

In the visual department, the scooter had standard fittings, like a front fairing with dual headlights, a small wind deflector, a two-up seat with passenger grab rails, and five-spoke alloy wheels.

The digital instrument panel provided readings for speed, odometer, clock, trip counter, fuel level, coolant temperature, and battery voltage. In addition, the color and graphic schemes varied by country.

It was built around a split single-cradle frame with high-tensile steel tubes. It was coupled to a hydraulic telescopic fork with 90 mm of travel on the front and a single shock absorber on the rear, with the engine acting as a swingarm.

As for power, the 2010 Aprilia SR50 had its soul brought to life by a 49cc liquid-cooled two-stroke single-cylinder engine fed by a fuel injection system, pushing the small machine to a top speed of 90 kph (56 mph).

The power was redirected to an automatic transmission with a dry centrifugal clutch and sent to the rear wheel through a final drive with gears in an oil bath.

APRILIA SR50 2010-2011

APRILIA SR50 49

engine specs
Type:Liquid cooled horizontal single cylinder two stroke
Displacement:49 cm3
Bore X Stroke:1.6x1.5 in OR 41 mm
Compression Ratio:11.5:1
Horsepower:0/ KW(hp)/RPM
Torque:0/ lb-ft/RPM OR 0 Nm/RPM
Fuel System:Electronic Fuel injection
transmission specs
Gearbox:Automatic
Clutch:Automatic centrifugal dry clutch
Primary Drive:V-belt
Final Drive:Gears in oil bath
chassis specs
Frame:Split single cradle frame in high tensile strength steel tube
Front Suspension:Hydraulic fork, 90 mm wheel travel
Rear Suspension:Engine unit acting as swingarm; frame linkages on two radial silent block mountings; wheel travel 70 mm
Front Brake:7.5” stainless steel disc; racing caliper with twin opposed 1.3” pistons
Rear Brake:7.5” stainless steel disc; racing caliper with twin opposed 1.2” pistons
dimension specs
Overall Length:73.2 in OR 1859 mm
Overall Width:27.8 in OR 706 mm
Seat Height:32.2 in OR 818 mm
Wheelbase:50.8 in OR 1290 mm
Ground Clearance:-
Weight:-
Fuel Capacity:1.8 gallons OR 6.8 L
tyres specs
Front:130/60 x 13
Rear:130/60 x 13
  report a mistake on this page