autoevolution
 

APRILIA Shiver 750 GT ABS (2011-2012) Specs, Performance & Photos

Segment: Naked / Road
Production years: 2011, 2012

APRILIA Shiver 750 GT ABS 2011-2012 3 Photos
APRILIA Shiver 750 GT ABS (2011-2012)APRILIA Shiver 750 GT ABS (2011-2012)APRILIA Shiver 750 GT ABS (2011-2012)

In 2011, alongside the standard model, the Italian motorcycle manufacturer launched the Aprilia Shiver 750 GT ABS, a more touring-oriented version of the base model fitted with several touring accessories that enhanced its touring capabilities.

In addition, the bike was delivered with additional safety equipment in the form of an Anti-Lock Braking System (ABS), which added a touch of safety and took care of the motorcycle in slippery situations.

The 2011 750 GT ABS model packed standard features, such as a half fairing with a single headlight unit, a small windscreen, a one-piece dual seat with passenger grab rails, an off-set horizontally-mounted rear shock, and 12-spoke alloy wheels.

It was built around a dismountable steel trellis frame softened by a 43 mm inverted telescopic fork on the front with 120 mm wheel travel and an adjustable shock absorber on the rear with 130 mm of travel.

Two 320 mm discs mounted on the 17-inch front wheel and coupled to four-piston calipers achieved the braking power. The 17-inch rear wheel was controlled by a 245 mm disc with a two-piston caliper.

The 2011 Aprilia Shiver 750 GT ABS had installed a 750cc four-stroke V-twin liquid-cooled engine at its core paired to a ride-by-wire system. Also, the engine was managed by a fuel injection system and delivered an output power of 95 hp at 9,000 rpm and 81 Nm (60 lb-ft) torque at 7,000 rpm.

APRILIA Shiver 750 GT ABS 2011-2012

APRILIA Shiver 750 GT ABS 750

engine specs
Type:Liquid Cooled, DOHC 90 Degrees V-twin
Displacement:749 cm3
Bore X Stroke:3.6x2.2 in OR 91 mm
Compression Ratio:11:1
Horsepower:95/9000 KW(hp)/RPM
Torque:60/7000 lb-ft/RPM OR 81/7000 Nm/RPM
Fuel System:EFI
transmission specs
Gearbox:6-speed, manual
Clutch:Multiple discs in oil bath with hydraulic control
Primary Drive:Straight cut gears
Final Drive:Chain
chassis specs
Frame:Modular steel trellis connected with high resistance bolts to aluminium side plates. Modular rear frame.
Front Suspension:Upside down fork with 43 stanchions. 120 mm wheel travel.
Rear Suspension:Hydraulic shock absorber with adjustable rebound and preload. 130 mm wheel travel.
Front Brake:Dual 320 mm diam. wave stainless steel floating disc. Radial callipers with four pistons. Metal braided brake pipe. ABS.
Rear Brake:240 mm stainless steel wave disc. Single piston calliper. Metal braided brake pipe. ABS.
dimension specs
Overall Length:89.2 in OR 2266 mm
Overall Width:31.5 in OR 800 mm
Seat Height:31.9 in OR 810 mm
Wheelbase:56.7 in OR 1440 mm
Ground Clearance:-
Weight:-
Fuel Capacity:4.2 gallons OR 15.9 L
tyres specs
Front:120/70 ZR 17
Rear:180/55 ZR 17
  report a mistake on this page