autoevolution
 

APRILIA Shiver 750 (2009-2010) Specs, Performance & Photos

Segment: Naked / Road
Production years: 2009, 2010

APRILIA Shiver 750 2009-2010 3 Photos
APRILIA Shiver 750 (2009-2010)APRILIA Shiver 750 (2009-2010)APRILIA Shiver 750 (2009-2010)

The Aprilia SL750 Shiver was a naked motorcycle made by Aprilia from 2007 and manufactured until 2016, when it was replaced by the Aprilia Shiver 900. It was also available in a partially faired version named Shiver 750 GT that debuted in 2009.

In 2009, the Italian motorcycle manufacturer launched the Aprilia Shiver 750, a naked motorcycle in its third year of production. The bike had the same technical, visual, and performance specifications as the previous model without modifications.

The 2009 model had factory-installed standard features, like a single headlight unit, a one-piece dual seat with passenger grab handles, an under-seat-mounted exhaust system, and ten-spoke lightweight wheels.

A 43 mm inverted telescopic fork handled the bike’s front suspension, delivering 120 mm wheel travel. In comparison, the rear end was controlled by an aluminum swingarm tied to an adjustable shock absorber with 130 mm of travel.

The motorcycle glided on 17-inch aluminum alloy wheels fitted with two 320 mm discs, four-piston calipers on the front, and a 245 mm disc with a two-piston caliper on the rear, offering excellent stopping power.

In the performance department, the 2009 Aprilia Shiver 750 had its heartbeat set by a 750cc four-stroke liquid-cooled V-twin powerhouse managed by a fuel injection system, boasting 95 hp at 9,000 rpm and 81 Nm (60 lb-ft) torque at 7,000 rpm.

APRILIA Shiver 750 2009-2010

APRILIA Shiver 750 750

engine specs
Type:Aprilia V90 Four stroke longitudinal 90° V twin. Liquid cooling. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Euro 3.
Displacement:749.9 cm3
Bore X Stroke:3.6x2.2 in OR 91 mm
Compression Ratio:11:1
Horsepower:95/9000 KW(hp)/RPM
Torque:60/7000 lb-ft/RPM OR 81/7000 Nm/RPM
Fuel System:Injection with Ride by Wire technology control of the throttle bodies
transmission specs
Gearbox:6-speed, manual
Clutch:Multiple discs in oil bath with hydraulic control
Primary Drive:Spur gears
Final Drive:Chain
chassis specs
Frame:Modular steel trellis connected with high strength bolts to aluminium side plates. Detachable rear frame.
Front Suspension:Upside down fork with 43 stanchions. 120 mm wheel travel.
Rear Suspension:Hydraulic shock absorber adjustable in spring preload and rebound damping. Wheel travel: 130 mm.
Front Brake:Double stainless steel floating disc 320 mm. Four piston radial calipers. Metal braided brake line.
Rear Brake:Stainless steel disc 240 mm with single piston caliper. Metal braided brake line.
dimension specs
Overall Length:89.2 in OR 2266 mm
Overall Width:31.5 in OR 800 mm
Seat Height:31.9 in OR 810 mm
Wheelbase:56.7 in OR 1440 mm
Ground Clearance:-
Weight:417 lbs OR 189 kg
Fuel Capacity:4.2 gallons OR 15.9 L
tyres specs
Front:120/70 ZR 17
Rear:180/55 ZR 17
  report a mistake on this page