Segment: Sport / Super Sport
Production years: 2008, 2009
The Aprilia RSV 1000 R was a sports model made by Aprilia between 2004 and 2010 as a successor to the Aprilia RSV Mille made between 1998 and 2003. The RSV 1000 R was manufactured until 2010, when it was replaced by the Aprilia RSV4.
The RSV 1000 R was the basic model of the range, followed by the RSV 1000 R Factory, the higher-spec version, and the RSV 1000 R Nera, which was a limited edition version made in only 200 units, featuring high-end material such as carbon fiber, magnesium, and titanium.
Like previous models, the 2008 RSV 1000 R featured an aggressive design with standard features, like a full fairing with a windscreen, a single seat with a passenger seat cover, a dual exhaust system with a muffler mounted on each side, and forged aluminum wheels with a 10-spoke rear and 12-spoke front.
As for the power, the 2008 Aprilia RSV 1000 R took its muscles from a 998cc four-stroke V-twin liquid-cooled engine mounted underneath its fuel tank, delivering an output power of 143 hp with a peak force at 10,000 rpm and 107 Nm (79 lb-ft) torque at 7,500 rpm.
The bike's power was kept on the safe side by a pair of 320 mm brake discs with four-piston calipers handling the front wheel and a 220 mm brake disc with a two-piston caliper stopping the rear wheel.
engine specs | Type: | 65° cc longitudinal V four stroke. Liquid cooled. Double overhead camshaft; four valves per cylinder. Bore and stroke 78 x 52.3 mm. | Displacement: | 998.9 cm3 | Bore X Stroke: | 3.1x2.1 in OR 79 mm | Compression Ratio: | 12.8:1 | Horsepower: | 179/12500 KW(hp)/RPM | Torque: | 85/10000 lb-ft/RPM OR 115/10000 Nm/RPM | Fuel System: | 4 throttle bodies, 8 injectors, ride-by-wire fuel management with multimapping |
---|
transmission specs | Gearbox: | 6-speed cassette type | Clutch: | Multi-plate wet clutch with slipper device. | Primary Drive: | Gears | Final Drive: | Chain |
---|
chassis specs | Frame: | Twin beam aluminium frame with mixed cast and pressed sheet sections. Adjustments for: headstock position and angle, engine height, swingarm pivot height. | Front Suspension: | Öhlins 43 mm upside-down fork. Lower fork bottoms for radial calipers. Adjustment for preload, compression and rebound. | Rear Suspension: | Öhlins monoshock with piggy-back cylinder. Adjustments for compression, rebound, spring preload and length. APS rising rate linkages. | Front Brake: | Double 320 mm lightweight stainless steel floating discs. Brembo monobloc radial calipers with 4 opposed pistons. Sintered pads. Radial master cylinder. Metal braided brake line. | Rear Brake: | 220 mm disc. Brembo floating caliper with 2 insulated pistons. Sintered pads. Master cylinder with integral reservoir. Metal braided brake line. |
---|
dimension specs | Overall Length: | 80.7 in OR 2050 mm | Overall Width: | 28.1 in OR 714 mm | Seat Height: | - | Wheelbase: | 56.1 in OR 1425 mm | Ground Clearance: | - | Weight: | 395 lbs OR 179 kg | Fuel Capacity: | 4.5 gallons OR 17.0 L |
---|
tyres specs | Front: | 120/70 ZR 17 | Rear: | 190/55 ZR 17 |
---|