autoevolution
 

APRILIA RS 125 (2009-2010) Specs, Performance & Photos

Segment: Sport / Super Sport
Production years: 2009, 2010

APRILIA RS 125 2009-2010 5 Photos
APRILIA RS 125 (2009-2010)APRILIA RS 125 (2009-2010)APRILIA RS 125 (2009-2010)APRILIA RS 125 (2009-2010)APRILIA RS 125 (2009-2010)

The Aprilia RS 125 was a Grand Prix-derived, small displacement sports production replica produced by Aprilia in 1992 to replace the Aprilia AF1. It was produced until 2010, when it was replaced by the Aprilia RS4 125.

In 1996, the bike had its first revision that included a new, improved Rotax 122 engine, air intakes integrated into the upper portion of the middle fairing, a rounded headlight, and a digital gauge in place of the temperature gauge. In addition, the "Extrema" designation was dropped.

In 1999, a revised version of the model was released, which included modifications, such as more rounded and bulbous fairings, a single air duct on the right-hand side, a larger lip on the headlight, and five-spoke rims.

In 2006, the bike was again revised, packing a new fairing similar to the one of the RSV1000R, with an angular design, two headlight bulbs, a digital gauge, and multi-spoke wheels created by Marchesini.

In 2009, the Italian motorcycle maker released the Aprilia RS 125, a motorcycle with the same package as the previous one, delivering the same characteristics without modifications.

The 2009 Aprilia RS 125 was fitted with standard features, such as a full fairing, a medium-sized windscreen, a two-piece dual seat with a rider lumbar support, a single exhaust system with a muffler mounted on the left-hand side, and multi-spoke wheels.

APRILIA RS 125 2009-2010

APRILIA RS 125 125

engine specs
Type:Single Cylinder Two-stroke
Displacement:124.8 cm3
Bore X Stroke:2.1x2.1 in OR 53 mm
Compression Ratio:12.5:1
Horsepower:0/- KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:Dell’Orto VHST 28 carburetor
transmission specs
Gearbox:6 Speed, manual
Clutch:Multi-plate in oil bath
Primary Drive:Gears
Final Drive:Chain
chassis specs
Frame:Sloping twin-spar frame in thin wall box section cast aluminium, with reinforcement cross-ribbing.
Front Suspension:Upside down hydraulic fork, 40 mm
Rear Suspension:Hydraulic monoshock with adjustable spring preload
Front Brake:Floating 320 mm disc. Radial caliper with four differential diameter pistons, 32 mm – 27 mm
Rear Brake:Single 220 mm disc. Caliper with two 30 mm pistons
dimension specs
Overall Length:77 in OR 1956 mm
Overall Width:28.3 in OR 719 mm
Seat Height:31.7 in OR 805 mm
Wheelbase:53 in OR 1346 mm
Ground Clearance:-
Weight:-
Fuel Capacity:3.7 gallons OR 14.0 L
tyres specs
Front:110/70 ZR 17
Rear:150/60 ZR 17
  report a mistake on this page