Segment: Sport / Super Sport
Production years: 2006, 2007
The Aprilia RS 125 was a Grand Prix-derived, small displacement sports production replica made by Aprilia in 1992 to replace the Aprilia AF1. It was produced until 2010, when it was replaced by the Aprilia RS4 125.
In 2006, the Italian motorcycle maker released the Aprilia RS 125, an entry-level machine derived from Aprilia's Moto GP racing program. It was created for the youngest and less experienced Aprilia fans and the more seasoned ones who wanted a more agile machine.
In 2006, the bike was again revised, packing a new fairing similar to the one of the RSV1000R, with an angular design, two headlight bulbs, a digital gauge, and multi-spoke wheels created by Marchesini.
Visually, the bike packed standard features, such as a full fairing, a medium-sized windscreen, a two-piece dual seat with a rider lumbar support, a single exhaust system with a muffler mounted on the left-hand side, and multi-spoke wheels.
The bike's front end was controlled by an inverted telescopic fork and a 320 mm brake disc with a four-piston caliper, while the rear end was handled by an adjustable monoshock and a 220 mm brake disc with a dual-piston caliper.
As for power, the 2006 Aprilia RS 125 had its soul brought to life by a 124cc two-stroke single-cylinder liquid-cooled engine that delivered an output power of 28 hp at 10,500 rpm and 19 Nm (14 lb-ft) torque at 9,000 rpm.
engine specs | Type: | Single Cylinder Two-stroke | Displacement: | 124.8 cm3 | Bore X Stroke: | 2.12X2.14 in OR 54 mm | Compression Ratio: | 12.5:1 | Horsepower: | 34/11000 KW(hp)/RPM | Torque: | 15/9000 lb-ft/RPM OR 20/9000 Nm/RPM | Fuel System: | Dell’Orto PHBH 28 BD |
---|
transmission specs | Gearbox: | 6 Speed | Clutch: | Multiple Discs In Oil Bath | Primary Drive: | Gear | Final Drive: | Chain |
---|
chassis specs | Frame: | Cast Aluminium Sloping Twin-spar With Thin Walled Structural Shell And Cross Rib Reinforcement | Front Suspension: | Upside-down Hydraulic Action Telescopic Fork | Rear Suspension: | Cast Aluminium Box Section Swingarm With Asymmetric Members | Front Brake: | Single 320mm Disc 4 Piston Caliper | Rear Brake: | Single 220mm Disc 1 Piston Caliper |
---|
dimension specs | Overall Length: | 76.9 in OR 1953 mm | Overall Width: | 28.3 in OR 719 mm | Seat Height: | 43.3 in OR 1100 mm | Wheelbase: | 52.9 in OR 1344 mm | Ground Clearance: | - | Weight: | 313.1 lbs OR 142 kg | Fuel Capacity: | 3.7 gallons OR 14.0 L |
---|
tyres specs | Front: | 110/70 ZR 17 | Rear: | 150/60 ZR 17 |
---|