autoevolution
 

APRILIA Pegaso 650 (1998-1999) Specs, Performance & Photos

Segment: Enduro/Offroad
Production years: 1998, 1999

APRILIA Pegaso 650 1998-1999 5 Photos
APRILIA Pegaso 650 (1998-1999)APRILIA Pegaso 650 (1998-1999)APRILIA Pegaso 650 (1998-1999)APRILIA Pegaso 650 (1998-1999)APRILIA Pegaso 650 (1998-1999)

In 1998, the Italian motorcycle maker released the Aprilia Pegaso 650, a dual-purpose machine in its sixth consecutive year of production that came with the same package as the previous model without any modifications.

The Aprilia Pegaso was a line of motorcycles manufactured by Aprilia from 1989 to replace the Aprilia Tuareg. It also was one of the first alternatives to the classic road-enduro motorcycles, with characteristics oriented more towards road use than off-road.

The bikes were manufactured in four displacements, such as 50cc made from 1992 to 1995, 125cc from 1989 to 1995, 600cc from 1990, and 650cc from 1992. In 2005, the Aprilia Pegaso 650 was available in three versions: Strada, Trail, and Factory.

Visually, the bike was fitted with standard fittings, like a redesigned half-fairing, a small windscreen, a one-piece dual seat with a passenger grab rail, an engine plate, an under-seat-mounted exhaust system, and wire-spoke wheels.

Besides its cosmetic modifications received a year earlier, the bike's significant changes included a new frame with a longer wheelbase, an increased rake and trial, and a revised airbox. In every other department, the bike remained unchanged.

In the performance department, the 1998 Aprilia Pegaso 650 was powered by a 652cc four-stroke liquid-cooled single-cylinder engine, boasting 49 hp at 7,000 rpm and 60 Nm (44 lb-ft) torque at 6,500 rpm.

APRILIA Pegaso 650 1998-1999

APRILIA Pegaso 650 652

engine specs
Type:4-stroke, single
Displacement:652 cm3
Bore X Stroke:3.9x3.3 in OR 99 mm
Compression Ratio:9:1:1
Horsepower:49/6300 KW(hp)/RPM
Torque:40/5000 lb-ft/RPM OR 54/5000 Nm/RPM
Fuel System:EFI, Mikuni BST 33 CV
transmission specs
Gearbox:5-speed, manual
Clutch:wet multi-disc, manual
Primary Drive:-
Final Drive:chain
chassis specs
Frame:aluminium twin-tube
Front Suspension:upside-down 40 mm forks, 180 mm travel
Rear Suspension:boxed swing arm with variable section in steel at high resistance, monoshock with 165 mm travel
Front Brake:stainless steel disc, 300 mm, floating caliper with different diameter pistons (30 and 32 mm)
Rear Brake:220 mm stainless disc with floating caliper
dimension specs
Overall Length:85.8 in OR 2179 mm
Overall Width:-
Seat Height:33.3 in OR 846 mm
Wheelbase:58.3 in OR 1481 mm
Ground Clearance:9.8 in OR 249 mm
Weight:355 lbs OR 161 kg
Fuel Capacity:5.8 gallons OR 22.0 L
tyres specs
Front:100/90 x 19
Rear:130/80 x 17
  report a mistake on this page