autoevolution
 

APRILIA ETX 350 (1990-1991) Specs, Performance & Photos

Segment: Enduro/Offroad
Production years: 1990, 1991

APRILIA ETX 350 1990-1991 2 Photos
APRILIA ETX 350 (1990-1991)APRILIA ETX 350 (1990-1991)

The Aprilia ETX was a line of off-road small-displacement motorcycles made by Aprilia in Noale, Italy. The bikes were manufactured in three versions: the 125cc model with a two-stroke engine and the 350cc and 600cc versions with four-stroke engines.

In 1984, the Italian motorcycle manufacturer released the Aprilia ETX 125, the smaller model of the family. It was produced between 1984 and 2001 and replaced by the Tuareg 125 model, which featured a larger fuel tank.

In 1985, the Aprilia ETX 350 was released as the second model in the family, with similar appearances and a different displacement. The 125cc was two-stroke, while the larger 350cc was four-stroke.

The bike had standard features in the visual department, such as a high-mounted front fender, a small front cowl with a rectangular headlight, a one-piece dual seat, a luggage rack, an under-seat-mounted exhaust, and wire-spoke wheels.

The ETX 350 model was built around a steel frame with a hydraulic telescopic fork on the front and an adjustable shock absorber on the rear, providing optimum suspension performance and handling.

As for braking, the bike’s wire-spoke wheels were fitted with a 260 mm disc mounted on the front and a 230 mm disc mounted on the rear, delivering optimum stopping performance.

In the power department, the 1990 Aprilia ETX 350 had its soul brought to life by a 349cc four-stroke single-cylinder air-cooled engine with a Dell'Orto carburetor feeding the piston, delivering 33 hp with a peak force at 7,500 rpm and 28 Nm (21 lb-ft) torque at 6,250 rpm.

APRILIA ETX 350 1990-1991

APRILIA ETX 350 349

engine specs
Type:air-cooled, four-stroke, single cylinder
Displacement:349 cm3
Bore X Stroke:3.1x2.8 in OR 79 mm
Compression Ratio:9.6:1
Horsepower:33/7500 KW(hp)/RPM
Torque:21/6250 lb-ft/RPM OR 28/6250 Nm/RPM
Fuel System:carburetor
transmission specs
Gearbox:6-speed, manual
Clutch:wet multi-disc, manual
Primary Drive:gears
Final Drive:chain
chassis specs
Frame:steel
Front Suspension:telescopic fork
Rear Suspension:monoshock
Front Brake:single disc
Rear Brake:single disc
dimension specs
Overall Length:-
Overall Width:-
Seat Height:-
Wheelbase:58.3 in OR 1481 mm
Ground Clearance:-
Weight:368 lbs OR 167 kg
Fuel Capacity:3.4 gallons OR 12.9 L
tyres specs
Front:90/90-21
Rear:130/80-17
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
  report a mistake on this page