autoevolution
 

BENTLEY S1 Continental 1955-1959 Photos, engines & full specs

Body style: Coupé (two-door)
Segment: Exotic
Production years: 1955, 1956, 1957, 1958, 1959

BENTLEY S1 Continental 1955-1959
BENTLEY S1 Continental (1955-1959)

After being purchased by Rolls-Royce, Bentley started to offer badge-engineered vehicles from its owner, and so was the situation with the S1 Continental, which was a Rolls-Royce Silver Cloud in disguise.

After launching the S1 Continental in a four-door version, the Crewe-based brand introduced a two-door version named Drophead Coupe. It was clear that the Bentley brand was focused on the driver's pleasure in handling the car and not on being driven in it.

It was a time when carmakers started to lose the formerly used fenders and create the so-called ponton-shaped vehicles, where the side panels formed a continuous area. Yet, at the front, the designers didn't know exactly how to deal with the headlights and placed them between the engine compartment and the inner sides of the fenders in separate, lower-mounted clusters. The grille was still massive, and instead of Rolls-Royce's statue, there was the "Flying-B" badge. On the car's sides, the long doors made the ingress and egress easier for four occupants, even though it was a car designed mainly for the front seats. The curved, sloped trunk lid followed an arched line toward the chromed bumper at the back.

Inside, at the front, there was a pair of bucket seats separated by a center armrest. The dash panel covered in wood featured a center-mounted radio. In front of the driver, Bentley installed the speedometer and tachometer, placed in front of the three-spoke steering wheel. At the same time, in front of the passenger was the glove compartment and an analog clock. Finally, in the back, the carmaker placed a leather-wrapped bench with a folding armrest in the middle.

Under the hood, the carmaker used the same 4.9-liter inline-six powerplant carried over from Rolls-Royce. In addition, the four-speed GM Hydra-Matic gearbox was available starting in 1956.

BENTLEY S1 Continental 1955, 1956, 1957, 1958, 1959
  1 gasoline engine
  • 4.9

BENTLEY S1 Continental
4.9

ENGINE SPECS - 4.9
Cylinders:L6
Displacement:4887 cm3
Fuel System:Carburetors
Fuel:Gasoline
PERFORMANCE SPECS
Top Speed:119 mph (192 km/h)
Acceleration 0-62 Mph (0-100 kph):12.9 s
TRANSMISSION SPECS
Drive Type:Rear Wheel Drive
Gearbox:Automatic, 4 Speed
BRAKES SPECS
Front:Drums
Rear:Drums
DIMENSIONS
Length:210 in (5334 mm)
Width:71.5 in (1816 mm)
Height:58 in (1473 mm)
Front/rear Track:60/60 in (1,524/1,524 mm)
Wheelbase:123 in (3124 mm)
WEIGHT SPECS
Unladen Weight:4145 lbs (1880 kg)
FUEL ECONOMY (NEDC)
Combined:13.4 mpg US (17.6 L/100Km)
CO2 Emissions:418 g/km
  report a mistake on this page